The cocoa Countryman E6 Directional Earset Mic, Low Gain with Detachable 2mm Cable and 3.5mm Locking Connector for Azden Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a 3.5mm locking connector for direct connection to Azden 15BT and 35BT wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Azden Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Vello FreeWave Wireless Flash Trigger LR and Receiver Kit B&H # VERFWLR MFR # RFW-LR: Will this work on the Panasonic FZ1000?

A: Yes, this trigger kit would be compatible with any camera which has a standard hotshoe like the Panasonic DMC-FZ1000.

Q: 2. hi, which better beamer model uses this flash YN685?

A: The FX3 would be compatible to the YN685. Click the link below to view; https://bhpho.to/3epE8bm

Q: 3. Will this fire my RT 600 Ex or does my flash need a receiver attached to it?

A: You need a receiver # GOX1RC

Q: 4. Will this work on a Fujifilm GFX50R and the AD100?

A: Yes this will work with that combination.

Q: 5. what does it mean NO PCL POSTSCRIPT support ?

A: If you only type business letters, draw simple graphs, or print photographs, you don't need the power of PostScript. Regular office or home printing does not require PCL or PostScript when using the Epson EcoTank Pro ET-5170 Wireless All-in-One Supertank Printer.

Q: 6. Will this work with the Sony A6000 camera?

A: According to Vello, this kit is not compatible with cameras that utilize the Sony Multi-Interface Shoe like the Sony A6000 or the Sony A7.

Q: 7. May be you know, can be this flash controlled from YN-622N-TX i-TTL Wireless Flash Controller without transmitter?

A: Yes, depending on your personal setup. This flash has Wireless TTL Master Mode for Nikon systems, and Optical TTL Slave Mode for Canon & Nikon systems. You would not need an additional transmitter because it is already built in.

Q: 8. Will this work with my Nikon D3x?

A: Yes it will work.

Q: 9. Will this work with omd em5 mark ll? And wirelessy as well?

A: Yes, the Bolt VS-570OP Wireless TTL Flash for Olympus/Panasonic Cameras may be used with the Olympus OM- D E-M5 Mark II Mirrorless Digital Camera. It is compatible for use as both a master and slave wireless flash, as well as standard use on the camera's hot shoe as an on-camera flash.

Q: 10. Currently I can work with nikon sb-910 no top of yn-622 as a master to control other nikon flashes mounted on yn-622 and control from the sb-910 itself on power output of my other nikons. Is it possible to do the smae with the sb-910 as master but instead of nikon flashes to use the new 685n and control their power output from the sb-910?

A: I think this will work for you. As a Canon shooter I use the YN622C controller to independently control other Yongnuo TTL flashes that sit on a YN622 transceiver. However the YN685 is already wireless ready for the YN622 controller (one for Nikon is available). Then from your camera menu you can control other flash configurations adjusting TTL stops or switching to manual or disabling the flash without manually going to the flash to do this. I did not see that the SB-910 is wireless so a YN622 transceiver is required. The YN685 has built-in wireless but for the YN622 for Nikon. Hope this helpfs.