The VS1818T Eight-Port HDMI over Single Cat5 Splitter from ATEN provides a fast and efficient way of switching high definition video from one input source to eight displays. It is suitable for any installation that requires HDMI content to be delivered to multiple destinations located up to 328 ft away from the source. The solution implements HDBaseT extension technology to connect the VS1814T to receiver units over one single Cat6 cable, transmitting rich HDMI multimedia content in real time. It supports up to 4k x 2k resolution, and features an EDID selection method to ensure constant and reliable EDID data relay for the HDMI source device, efficiently optimizing video resolution.

EDID Mode Selection    Rack-Mountable    Up to 3.4 Gb Signaling Rates    Resolution: 4K x 2K, 1080p    HDCP and HDBaseT Compatible    Maximum Pixel Clock: 340 MHz

One HDMI input to eight HDMI outputs via a Cat5e cable

Offers local HDMI output

Extends displays up to 328 ft

Implements HDBaseT extension technology using only one Cat5 cable to connect the transmitter and receiver

Anti-jamming resists signal interference during high-quality video transmissions using HDBaseT technology

4K x 2K, 3D HDMI cable (HDCP compatible)

Supports Dolby True HD and DTS HD Master Audio

Consumer Electronics Control (CEC) support

Built-in bidirectional RS-232 serial remote port for high-end system control

Supports resolutions up to Ultra HD 4k x 2k and 1080p Full HD

Supports up to 340 MHz bandwidth for high performance video

Signaling rates up to 3.4 Gb

Related Questions and Answers

Q: 1. Does this pass audio over the HDMI connection?

A: Yes, HDMI carries sound.

Q: 2. How doest it PASSIVELY convert analog to digital and vice versa?

A: There is no Analog to Digital conversion on the SoundTools CAT Rack FX Audio Over CAT5 Rack. This unit is effectively a snake that uses CAT 5/6/7 ethernet instead of a multichannel copper cable. It can accept and send both Analog and Digital (AES/EBU, DMX. Etc) signals in the same CAT5/6/7 Ethernet cable.

Q: 3. which cable is advise for 300 feet run between the 2 devices?

A: Regarding your question related to the SoundTools CAT Rack MX Audio Over CAT5 Rack, you can use CAT6 or CAT6A cable for a 300-foot run between two SoundTools CAT Rack MX rack units.

Q: 4. does this come with a remote control ?

A: The Rocstor 5-Port 4K HDMI Splitter does not include a remote control. Since all 5 outputs would have the same signal. If you wanted a 5 input splitter for 5 devices with a remote the following model comes with a remote. It takes 5 inputs to one output. KanexPro 5x1 HDMI Switcher with 4K Support BH #KASWHD5X14K

Q: 5. This equipment brings the eight wires?

A: Two custom KVM Cable Sets are included with your purchase.

Q: 6. Can this do one to many using a network switch?

A: No it can not. it is a point to point system it will not work with routers or network switches.

Q: 7. Do you need two of these? Or does the package contain the sender and receiver?

A: The box contains the receiver and the transmitter.

Q: 8. Has anyone tried running a 150 ft cat5e with it?

A: According to Comprehensive: Extend full 1080p video signal up to 164 feet using 1 CAT6 cable and up to 132 feet using 1 Cat-5e cable. For 150' you will need CAT6.

Q: 9. Can these 12 lines be used for signals in either direction?

A: Yes, you can send audio in either direction.

Q: 10. What options does the EDID switch provide?

A: EDID stands for Extended Display Identification Data and it is a metadata format for display devices to describe their capabilities to a video source. That switch allows you to turn EDID support off and on.