The tan Countryman E6X Omnidirectional Earset Mic, Low Gain with Detachable 1mm Cable and LEMO 4-pin Connector for Beyerdynamic Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a LEMO 4-pin connector for direct connection to Beyerdynamic TS 316, TS 400, and TS 600 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Beyerdynamic Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is There a updated one for the canon r3 I think it would be xproc II but can not find it Thank you

A: At t his time there is only the version one, Godox XProC TTL Wireless Flash Trigger for Canon Cameras. The Version two that are out now is for Leica.

Q: 2. Will this work with a Canon 1DX mk III? My old Pocket Wizards will not work with the 1DX mk III

A: Yes. The following system will work with canon e-ttl metering system. Depending on whihc pocket wizard being used it could need to be updated with the latest firmware. We suggest contacting manufacture for support.

Q: 3. Can I use the Godox Xpro F to trigger a off-camera Godox V860IIN? Will if work with other Nikon flashes?

A: When triggering a Godox flash you can trigger a Nikon or other brand flash and The transmitter will take care of the communication. It only has control of Godox flashes or when using receivers, flashes of the same type as the controller.

Q: 4. Can i use this trigger with a none TTL sony Godox flash like. TT600S?

A: Yes, you can use this transmitter to fire a non-TTL flash such as the Godox TT600.

Q: 5. Does it work with fujifilm xt200?

A: Yes it will work.

Q: 6. I recently purchased a Godox Gemini GS200II 200Ws Monolight, will this unit work on its own with the wireless functions of the light? I'm assuming it would but I want to make sure. Thank you!

A: The XPro transmitter can communicate with the built in receivers in the Godox GS series.

Q: 7. Will it work with a Godox flash while off camera?

A: The receiver can fit a Godox flash at the bottom so you can fire it with the Freewave LR trigger.

Q: 8. Do I need to plug the flash in to the receiver or can I just put it on a hotshoe

A: Any way that is convenient. You can put the flash on to the hot shoe if it is that type of flash or if it is a studio type flash you need to use the supplied cord. Remember this is a manual flash not auto so you have to test or use a flash meter

Q: 9. This transmitter can work with canon 600EX RT without external Godox receiver?

A: Unfortunately, the receiver inside of the Canon 600EX RT flash cannot be triggered using the XPro C Transmitter without using the Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon B&H # GOX1RC. Another transmitter than can fire the internal receiver of the Canon 600EX RT is the Phottix Laso TTL Flash Trigger Transmitter for Canon B&H # PH89092.

Q: 10. will this Transmitter work with the Canon 40D ?

A: Yes, the Godox XProC TTL Wireless Flash Trigger for Canon Cameras would be compatible for use with the Canon EOS 40D DSLR Camera, as indicated on page 45 of the Godox XProC TTL Wireless Flash Trigger for Canon Cameras' instruction manual.