The cocoa Countryman E6X Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and TA3F Connector for Audix Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a TA3F connector for direct connection to Audix B60 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Audix Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Compatible with Olympus OMD?

A: Yes, that will work with most cameras with a regular hotshoe. The Flash Trigger LR is not TTL. It is manual so it will work with strobes and moonlights. And with speedlights that have a manual function.

Q: 2. will this Transmitter work with the Canon 40D ?

A: Yes, the Godox XProC TTL Wireless Flash Trigger for Canon Cameras would be compatible for use with the Canon EOS 40D DSLR Camera, as indicated on page 45 of the Godox XProC TTL Wireless Flash Trigger for Canon Cameras' instruction manual.

Q: 3. Is There a updated one for the canon r3 I think it would be xproc II but can not find it Thank you

A: At t his time there is only the version one, Godox XProC TTL Wireless Flash Trigger for Canon Cameras. The Version two that are out now is for Leica.

Q: 4. Can NiMh batteries be used in the Godox XPro N?

A: Rechargeable Ni-MH batteries like the Eneloop can be used with the Godox XProN TTL Wireless Flash Trigger for Nikon Cameras BH #GOXPRON.

Q: 5. Can I control multiple (say 3) off camera YN-685s, with just using YN-622C-TX and without requiring all of them on YN-622C receiver?

A: You don't need the YN-622C receiver to control these flashes. They have the radio receivers built into the flash.

Q: 6. Can i use this trigger with a none TTL sony Godox flash like. TT600S?

A: Yes, you can use this transmitter to fire a non-TTL flash such as the Godox TT600.

Q: 7. I recently purchased a Godox Gemini GS200II 200Ws Monolight, will this unit work on its own with the wireless functions of the light? I'm assuming it would but I want to make sure. Thank you!

A: The XPro transmitter can communicate with the built in receivers in the Godox GS series.

Q: 8. Do you need this to trigger a Godox V1 off camera?

A: Yes.

Q: 9. Will the Pc port on this flash be able to trigger other devices when connected to it like a radio transmitter?

A: No, the PC sync port is input only. It will not send a signal out the port to work a transmitter.

Q: 10. Do I need to plug the flash in to the receiver or can I just put it on a hotshoe

A: Any way that is convenient. You can put the flash on to the hot shoe if it is that type of flash or if it is a studio type flash you need to use the supplied cord. Remember this is a manual flash not auto so you have to test or use a flash meter