The cocoa Countryman E6 Directional Earset Mic, Low Gain with Detachable 1mm Cable and TA4F Connector for Anchor Audio Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a TA4F connector for direct connection to Anchor Audio WB-6000, WB-6400, and WB-8000 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Anchor Audio Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is this compatible with Nikon D5600? All functions work on Nikon D5600?

A: This kit is compatible with a D5600.

Q: 2. Will this work on a Nikon FM10 film camera to trigger V860IIF speedlites? (Fuji Version)

A: The Godox XProN TTL Wireless Flash Trigger for Nikon Cameras should work on the Nikon FM10 to set off the Godox V860IIF. You will need to set in the menu of the trigger to use the center pin only. And the flash will be manual only. It will not support TTL or HSS.

Q: 3. work with einstein strobe?

A: You may connect the Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon, B&H # GOX1RN to an Einstein monolight in order to trigger from the X-Pro N transmitter. However, only manual flash sync will be available with no control over the flash output or TTL/HSS. https://bhpho.to/2LOILD4

Q: 4. Will this transmitter work with the Canon Rebel T6 (1300 D) ?

A: Yes it is compatible with the T6 to fire a Godox flash with the X radio system built in the flash.

Q: 5. Will the XProF work with my Fuji X-H1?

A: Yes, the XPro F is compatible with the Fuji X-H1.

Q: 6. Is Godox XProO TTL for Olympus/Panasonic compatible with Leica Q2?

A: Although the XPRO O Transmitter can fit the Leica Q2, it will not transmit any TTL information.

Q: 7. Does this work with the the godox X2T ?

A: The Godox XTR16 Wireless Power-Control Flash Trigger Receiver (B&H# GOXTR16) is a Godox X radio system receiver that can be added to many Godox strobes (and to some Godox flashes) to allow them to receive a wireless signal to fire (and also to control flash power) from Godox X radio transmitters. It will not support HSS or TTL. One example of such X series radio transmitters is the popular Godox X2T 2.4 GHz TTL Wireless Flash Trigger, yes, for. . . . . . Canon (B&H# GOX2TC): https://bhpho.to/3c4ytc5 . . . Nikon (B&H# GOX2TN): https://bhpho.to/3odlieI . . . and Sony (B&H# GOX2TS): https://bhpho.to/3n89Odf

Q: 8. Will this trigger the Godox TT600 and allow remote adjustments to the flash power?

A: Yes it will allow you to adjust the power

Q: 9. Will this trigger work with a Sony A7iii with the Godox Ad600 Pro strobes? Thanks in Advance

A: Yes it will

Q: 10. Is the Godox XPro II TTL compatible with both the D6 and Z9? And once attached will they trigger the SB910 & SB5

A: This transmitter will work with your Nikon cameras but to trigger off camera Nikon flashes you do need a receiver under your Nikon flashes to receive the signal from the trigger. You can get the Godox X1R-N TTL Wireless Flash Receiver for Nikon B&H # GOX1RN MFR # X1R-N.