The light beige Countryman E6i Omnidirectional Earset Mic, Medium Gain with Detachable 1mm Cable and 3.5mm locking Connector for Happie Amp or Empower Sound Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 3.5mm locking connector for direct connection to Happie Amp or Empower Sound and Amazing Amp wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Happie Amp or Empower Sound Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Hi recently I bought a flash kit bowens gemini 400r...is it compatible with xpro?

A: No.

Q: 2. Does this work with the the godox X2T ?

A: The Godox XTR16 Wireless Power-Control Flash Trigger Receiver (B&H# GOXTR16) is a Godox X radio system receiver that can be added to many Godox strobes (and to some Godox flashes) to allow them to receive a wireless signal to fire (and also to control flash power) from Godox X radio transmitters. It will not support HSS or TTL. One example of such X series radio transmitters is the popular Godox X2T 2.4 GHz TTL Wireless Flash Trigger, yes, for. . . . . . Canon (B&H# GOX2TC): https://bhpho.to/3c4ytc5 . . . Nikon (B&H# GOX2TN): https://bhpho.to/3odlieI . . . and Sony (B&H# GOX2TS): https://bhpho.to/3n89Odf

Q: 3. I am planning on buying the canon EOS R. 1st question will this work on that body? 2nd question I currently have a 580exii and two 430 speed lights. Will this remote trigger without any additional equipment? Thanks.

A: Yes , it will work with the EOS R , you will need receivers for both flashes # GOX1RC

Q: 4. So, I'm using my Canon 580EXII speedlite on a stand with an umbrella, Will it work with just the hot shoe or do I need to plug anything in? I'm asking because my sync cord port on my speedlite is damaged and with cords it misfires.

A: Yes! This can work with just the hot shoe. I am using mine directly from the hot shoe with a range up to 150 feet away.

Q: 5. Will it works in iTTL mode with an Nikon SB900 flash ?

A: It can work as long as you have a X1r-N https://bhpho.to/2Xj9N7M.

Q: 6. High speed sync

A: Yes, this trigger offers HSS with a compatible flash.

Q: 7. Will this trigger work with a Sony A7iii with the Godox Ad600 Pro strobes? Thanks in Advance

A: Yes it will

Q: 8. Is the light output comparable to the Nikon SB 5000? I have heard some say the the figures are off as far as the brightness of the YN685. I use mine 99% of the time on camera.

A: It is not as bright as th sb5000. I have 4 of them and like what I get out of them.

Q: 9. Can this also trigger Nissin i60a sony?

A: From the manufacturer; XproS could NOT support Nissin i60a sony, pls note.

Q: 10. Is the newest model for the Lumix S5IIX?

A: No, this is not the latest model, but it will work with S5IIX. If you looking for the most recent release it will be Godox Xnano O Touchscreen TTL Wireless Flash Trigger for Olympus and Panasonic https://bhpho.to/3K44zWJ and before that was Godox XPro II TTL Wireless Flash Trigger for Olympus and Panasonic Cameras https://bhpho.to/3zAvrZo