The PE8216B eco PDU with Outlet Monitoring from ATEN is a 0U, 20A maximum output, 200 to 240V, multi-outlet power distribution unit, designed to increase the efficiency of data center usage with a focus on green-energy power usage. The PE8216B has 14 x C13 and 2 x C19 outlets, and features NRGence´s proactive overload protection, which will automatically power off the last outlet that caused a current overload.

NRGence eco PDUs are engineered to provide secure, centralized, intelligent, power management (power on, off, cycle) of data center IT equipment (servers, storage systems, KVM switches, network devices, serial data devices, etc.), and is designed with the ability to monitor the center´s health environment via sensors.

The PE8216B offers remote power control combined with real-time power measurement - allowing you to control and monitor the power status of devices attached to the PDU bank and outlet, from practically any location via a TCP/IP connection.

The power status of each outlet can be set individually, allowing users to switch each device On/Off. The eco PDU also offers comprehensive power analysis reports, which can separate departments and locations, providing precise measurements of current, voltage, power and watt-hour in a real-time display. Installation entails plugging cables into their appropriate ports and then applying the user-friendly, browser-based configuration and management. Since the eco PDU firmware is upgradeable over the internet, you can stay current with the latest functionality improvements simply by downloading updates as they become available.

Additionally, this NRGence eco PDU supports any 3rd-party V3 SNMP Manager Software and NRGence eco Sensors (eco PDU Manager Software). The eco Sensors PDU provides you with an easy method for managing multiple devices, offering an intuitive and user-friendly graphical user interface that allows you to configure a PDU device and monitor power status of the equipment connected to it.

With its advanced security features and ease of operation, the PE8216B eco PDU is a convenient, reliable, and effective way to remotely manage power access for multiple computer installations and allocate power resources in an efficient, green-energy way.

Supports:
10/100Mbit Ethernet Interface
TCP/IP, UDP, HTTP, HTTPS, SSL, DHCP, SMTP, NTP, DNS, Auto Sense, Ping, SNMP V1,V2&V3
2-level account/password security, IP/MAC filter, 128 bit SSL, RADIOUS
eco Sensors, Browser (IE, Firefox, Chrome, Safari)

PDU and outlet level power metering and monitoring
Environment monitoring - supports external temperature/temperature & humidity sensors for rack temperature and humidity monitoring
Current, voltage, power, power dissipation, temperature, and humidity metering and threshold level setting
Support door sensor

Remote power outlet control (On/Off, Power Cycle) by individual outlets and outlet groups
Outlet group support at the PDU
Supports multiple power control methods - Wake on LAN, System After AC Back, Kill the Power
Power-On sequencing - users can set the power-on sequence and delay time for each outlet to allow equipment to be powered on in the correct order
Proactive overload protection(POP) - automatically powers off the last outlet that caused the current overload

Related Questions and Answers

Q: 1. How do I dispose of this product ?

A: The preferred options for disposal are to send to licensed reclaimers, or to permitted incinerators. Any disposal practice must be in compliance with federal, state, and local regulations. Do not dump into sewers, ground, or any body of water.

Q: 2. Will this be able to fit under a graphics card?

A: no there may be some issues mounting this under a graphics card as the device is rather tall, while it may fit under a single card it will mot fit under a dual card

Q: 3. does this work with tentacle sync devices?

A: No, the Deity Microphones C19 Timecode Cable for Canon R5 C Camera does not work with the Tentacle Sync E mkII Timecode Generator. The Deity 3.5mm locking connector is slightly different than the one used by Tentacle Sync and does not stay securely connected to the Tentacle Sync input/output. As a better option, use the Tentacle Sync Tentacle to DIN 1.0/2.3 Cable (B&H # TETD123C), which is fully compatible with Tentacle Sync timecode devices.

Q: 4. Can you use LP-E6 batteries with this?

A: You could use LP-E6 batteries in the Vello BG-C19 Battery Grip for Canon EOS R Mirrorless Camera, but even with two batteries it will not run the EOS camera for a long time. Also the In-Grip Battery Charging via USB-C Port feature will not work.

Q: 5. are there specific external enclosures for this type of capture card or will it fit in the standard pcie enclosure? i want to be able to connect this to a laptop via thunderbolt 3

A: We are not aware of this products compatibly with a PCI enclosure as it has a different kind of connection. Instead you could look at the Magewell Pro Capture SDI Card (1-Channel), B&H # MA100DESDI, which you should be able to install in the Sonnet Echo Express SE III Thunderbolt 3 Expansion Chassis for PCIe Cards, B&H # SOECEXPSE3T3. https://bhpho.to/2tlQ4Gl https://bhpho.to/2S55UyK

Q: 6. Does this work with the R8?

A: No, the Vello BG-C19 Battery Grip for Canon EOS R Mirrorless Camera does not work with the Canon EOS R8 Mirrorless Camera. However, the Vello BG-C18 Battery Grip for Canon EOS RP Mirrorless Camera will mount and work on the Canon EOS R8 Mirrorless Camera, though it has not been listed as officially compatible by the manufacturer.

Q: 7. Is this cable made from ' YUNG LI ' ?

A: No. It is made from Furman.

Q: 8. Does this come with dual battery charger?

A: No, the Vello BG-C19 Battery Grip for Canon EOS R Mirrorless Camera does not come with a dual battery charger. That can be purchased separately.

Q: 9. Is this unit, not just the cord, UL-listed? If Yes, what is the UL listing number on the UL label?

A: UL 60950-1, FCC Class A is the cert information from the manual.

Q: 10. WIll Vello produce a grip for the R6?

A: At this time, Vello has not produced a battery grip for the EOS R6. In the event that they do, we would definitely make an announcement via the B&H E-Mail Newsletter.