The light beige Countryman E6i Omnidirectional Earset Mic, Medium Gain with Detachable 2mm Cable and 3.5mm Connector for Comtek Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 3.5mm connector for direct connection to Comtek M-72 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Comtek Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will the Godox XProN TTL work with my TT600 flash on a Nikon?

A: Yes it will

Q: 2. Is the newest model for the Lumix S5IIX?

A: No, this is not the latest model, but it will work with S5IIX. If you looking for the most recent release it will be Godox Xnano O Touchscreen TTL Wireless Flash Trigger for Olympus and Panasonic https://bhpho.to/3K44zWJ and before that was Godox XPro II TTL Wireless Flash Trigger for Olympus and Panasonic Cameras https://bhpho.to/3zAvrZo

Q: 3. will any external speed light battery compatible with canon work with this flash?

A: Being that this flash uses the same HV port as Canon speedlites, you could use an external battery pack as long as it offers a CZ type cable such as those from Quantum, Lumedyne or Bolt.

Q: 4. So, I'm using my Canon 580EXII speedlite on a stand with an umbrella, Will it work with just the hot shoe or do I need to plug anything in? I'm asking because my sync cord port on my speedlite is damaged and with cords it misfires.

A: Yes! This can work with just the hot shoe. I am using mine directly from the hot shoe with a range up to 150 feet away.

Q: 5. Is this work with Cannon R7 and Sunpak Df 4000u

A: The Vello FreeWave LR Wireless Flash Trigger and Receiver Kit is compatible with most hot shoe center pin connections. It will trigger flashes but will not have TTL functionality with your camera. Flashes will only operate in manual mode.

Q: 6. I have a GH5 and am planning on buying Godox SK400II. Is this trigger compatible?

A: Yes they are compatible.

Q: 7. Can this trigger also fire a speedlight with a pocket wizard iii receiver? Didn’t know if it could communicate with the pocket wizard in receiver mode.

A: Unfortunately, this transmitter can only fire Godox X receivers. The Pocket Wizard system would work on a different frequency.

Q: 8. Will it works in iTTL mode with an Nikon SB900 flash ?

A: It can work as long as you have a X1r-N https://bhpho.to/2Xj9N7M.

Q: 9. Using XPro-F on X-T2 with Godox TT685-F. Only shows up on Fuji LCD Menu under FlashFlash Settings as "OFF". Cannot get the camera to show "TTL". Thinking maybe I might have bad unit? I can sync XproF to Godox and test fire but camera does not seem to know it has a flash trigger on it. Any ideas?

A: Here's the solution for anyone experiencing the same problem. You camera must be set to mechanical shutter. Once it's set to MECHANICAL SHUTTER (not ES) then the camera body Flash Menu Flash Settings will display the available on/off & TTL functions for the flash unit.

Q: 10. Will this trigger work with a Sony A7iii with the Godox Ad600 Pro strobes? Thanks in Advance

A: Yes it will