The black Countryman E6i Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and LEMO 3-pin Connector for WisyCom Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a LEMO 3-pin connector for direct connection to WisyCom MTP30, MTP40, MTP40S, MTP41, and MTP41S wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits WisyCom Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is this compatible with the Godox R200?

A: The Godox R200 ringflash is an attachment for an AD200. The AD200 is compatible with this transmitter.

Q: 2. Will this work with canon speedlite? Ea mole: 420 and 580?

A: While you do not list the full name of the Canon flashes you own, if your flashes are E-TTL II compatible flashes, then you may use the Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon on the bottom of your flash to trigger the unit with the Godox XProC TTL Wireless Flash Trigger for Canon Cameras listed above. If you own the 580EX/580EXII, or 430EX/430EX II flashes, it should work. If you have the older 420EZ flash, it may not work.

Q: 3. Does it work with Sony A6000 camera?

A: The XProS will work on a Sony A6000.

Q: 4. I see that it will allow HSS with the K-3ii, but what about with the older K-3?

A: The original K3 should offer the same HSS functional with this remote as it does with the K3 II. However, Godox has not tested the original K3 to confirm this. Your results may vary.

Q: 5. Can this trigger be used/work with Sony Flash HVL-F43?

A: The HVL-43M does not have wireless radio capabilities built-in, nor do Sony flashes operate on the same frequency as the Godox radio transceivers. That being said, you can use any of their flashes off camera by simply getting a separate receiver for the bottom of the flash. You'll get full TTL and HSS functionality this way. https://bhpho.to/3okTIew The X1R will communicate with the X1, X2, and XPro transmitters for Sony. :)

Q: 6. Is the XProN Wireless controllable with the GodoxPhoto iOS App like the Godox X2 is?

A: The Xpro is not app compatible.

Q: 7. Can I fully control the speed light settings from a Yongnuo YN-622N-TX wireless controller mounted on camera?

A: Yes, it is compatible and you can control from the camera the flash with the YN-622But the flash you picked is for Canon and the correct 622C is, Yongnuo YN-622C-TX E-TTL Wireless Flash Controller for Canon B&H # YOYN622CTX MFR # YN-622C-TX

Q: 8. I have a Phottix Odin Receiver and Canon flash, will this trigger work for that setup ?

A: No, the Godox XProF TTL Wireless Flash Trigger for Fujifilm Cameras is not compatible for use with the Phottix Odin TTL Flash Trigger Receiver for Canon. Godox radio wireless transmitters are only compatible for use with Godox flashes/studio strobes or receivers that have Godox's built-in X-wireless 2.4GHz wireless receiver. They are not compatible for use with third-party remote systems. If you need a wireless radio transmitter for use with the Phottix Odin TTL Flash Trigger Receiver for Canon, I would instead recommend the Phottix Odin II TTL Flash Trigger Transmitter for Canon, B&H # PH89074, or the Phottix Odin Lite Flash Trigger Transmitter, B&H # PH89090, for your usage needs.

Q: 9. If I have two Godox flashes, do I need to buy two flash triggers? Or would one suffice to control both of them?

A: You can trigger multi flashes from one trigger as long as you have them in the same channel , you can set them to different groups for light control

Q: 10. Can I sync/use two Godox SK400II-V strobes and my Westcott FJ400 via this Trigger? (Sony)

A: The Godox XProS TTL Wireless Flash Trigger for Sony Cameras cannot speak directly to the radio in the Westcott FJ400 400Ws Strobe with AC/DC Battery (US/No. America Plug), B&H # WEFJ400S. However, you can use the XProS on-camera to trigger Godox lights (with the trigger in manual mode and the camera set to 1/200th of a second). You would put the FJ400 lights into optical-sync mode and they will fire optically when the Godox lights are triggered by the on-camera XProS.