The cocoa Countryman E6i Omnidirectional Earset Mic, Low Gain with Detachable 1mm Cable and TA4F Connector for Paso Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a TA4F connector for direct connection to Paso MW223 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Paso Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will the LR transmitter trigger the Vello Captain receiver. I realize the flash would have to be on manual?

A: While the Vello Captian's transmitter will trigger the Vello LR's receiver (only when using channels 1-4), the opposite is not true; the Vello LR's transmitter WILL NOT trigger the Vello Captain receiver.

Q: 2. is this going to be available for sony?

A: As of today, Godox XProS TTL Wireless Flash Trigger for Sony Cameras B&H # GOXPROS is expected to be available by 4/8/18.

Q: 3. Will this work using manual flash settings? Or just for TTL?

A: This transmitter allows for flash control in both TTL and Manual.

Q: 4. Does it work with Pocket Wizard?

A: Yes. As the Bolt VS-570C Wireless TTL Flash for Canon Cameras has both a PC sync terminal on the side of the unit and a Canon hot shoe on the bottom of the unit, it would be compatible with with the PocketWizard FlexTT5 Transceiver for Canon, FlexTT6 Transceiver for Canon, MiniTT1 Transmitter for Canon, and Plus IV Transceiver radio remotes with their built-in hot shoes, and with all other PocketWizard remote using their PocketWizard PC1N Locking PC Sync Cable (1') included with the radio remotes.

Q: 5. Will I be able to use this flash with my Nikon D300 and fire it wirelessly? I don't mean as a slave, it will be my only flash, but I would like to be able to use it without any cables.

A: This flash will mount directly onto the cameras hotshoe and fire as any traditional flash will and does not require any type of cables or adapters to do so.

Q: 6. Does this trigger works with all their capabilities with the Sony a6500 camera ?

A: Yes this trigger is fully compatible with the Sony A6500.

Q: 7. Can this trigger be used/work with Sony Flash HVL-F43?

A: The HVL-43M does not have wireless radio capabilities built-in, nor do Sony flashes operate on the same frequency as the Godox radio transceivers. That being said, you can use any of their flashes off camera by simply getting a separate receiver for the bottom of the flash. You'll get full TTL and HSS functionality this way. https://bhpho.to/3okTIew The X1R will communicate with the X1, X2, and XPro transmitters for Sony. :)

Q: 8. I heard that this trigger do not going down more than 1/128 in output power,and the flash it self ( AD600pro) can go down to 256, is this correct?

A: You have to enable the 256 power on the trigger

Q: 9. Can I fully control the speed light settings from a Yongnuo YN-622N-TX wireless controller mounted on camera?

A: Yes, it is compatible and you can control from the camera the flash with the YN-622But the flash you picked is for Canon and the correct 622C is, Yongnuo YN-622C-TX E-TTL Wireless Flash Controller for Canon B&H # YOYN622CTX MFR # YN-622C-TX

Q: 10. Is this compatible with Nikon D3200? All functions work on Nikon D3200?

A: I can't say because I only use it as off camera flash with a yougnuo radio flash trigger.