The cocoa Countryman E6i Omnidirectional Earset Mic, Low Gain with Detachable 1mm Cable and 3.5mm locking Connector for Sennheiser Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 3.5mm locking connector for direct connection to Sennheiser SK 2020-D wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Sennheiser Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is this flash compatible with the Nikon WR-R10?

A: This Yongnuo YN685 Wireless TTL Speedlite is made to be compatible with Nikon cameras and their i-TTL system. Though the manufacturer has not guaranteed it, this should be compatible with the Nikon WR-R10 Wireless Remote like any other Nikon flash with its built-in 2.4 GHz Radio Slave System.

Q: 2. Can this trigger be used/work with Sony Flash HVL-F43?

A: The HVL-43M does not have wireless radio capabilities built-in, nor do Sony flashes operate on the same frequency as the Godox radio transceivers. That being said, you can use any of their flashes off camera by simply getting a separate receiver for the bottom of the flash. You'll get full TTL and HSS functionality this way. https://bhpho.to/3okTIew The X1R will communicate with the X1, X2, and XPro transmitters for Sony. :)

Q: 3. Will this work using manual flash settings? Or just for TTL?

A: This transmitter allows for flash control in both TTL and Manual.

Q: 4. This product is compatible with panasonic GH3?

A: Yes it should work but this product is made to be used as a Remote Shutter; Vello FreeWave Wireless Remote Shutter Release for Canon and Panasonic Kit B&H # VERWC2PK

Q: 5. If I have two Godox flashes, do I need to buy two flash triggers? Or would one suffice to control both of them?

A: You can trigger multi flashes from one trigger as long as you have them in the same channel , you can set them to different groups for light control

Q: 6. Is this compatible with Nikon D3200? All functions work on Nikon D3200?

A: I can't say because I only use it as off camera flash with a yougnuo radio flash trigger.

Q: 7. Hi, Is this compatible with both Mamiya RZ67 and Fujifilm GFX?

A: The Vello FreeWave LR Wireless Flash Trigger and Receiver Kit may be used on the hot shoe located on the side of the Mamiya RZ 67 or on the hot shoe on top of a Fujifilm GFX camera.

Q: 8. I have a Phottix Odin Receiver and Canon flash, will this trigger work for that setup ?

A: No, the Godox XProF TTL Wireless Flash Trigger for Fujifilm Cameras is not compatible for use with the Phottix Odin TTL Flash Trigger Receiver for Canon. Godox radio wireless transmitters are only compatible for use with Godox flashes/studio strobes or receivers that have Godox's built-in X-wireless 2.4GHz wireless receiver. They are not compatible for use with third-party remote systems. If you need a wireless radio transmitter for use with the Phottix Odin TTL Flash Trigger Receiver for Canon, I would instead recommend the Phottix Odin II TTL Flash Trigger Transmitter for Canon, B&H # PH89074, or the Phottix Odin Lite Flash Trigger Transmitter, B&H # PH89090, for your usage needs.

Q: 9. I have an A7iii and the XproS and X1. I have it in manual 1/200th, wireless flash turned on in the menu of the A7, setting effect off. The trigger will fire the flash but not the camera, any ideas?

A: I have the A7 iii as well and my flash will not work off camera as well.

Q: 10. Will I be able to use this flash with my Nikon D300 and fire it wirelessly? I don't mean as a slave, it will be my only flash, but I would like to be able to use it without any cables.

A: This flash will mount directly onto the cameras hotshoe and fire as any traditional flash will and does not require any type of cables or adapters to do so.