The cocoa Countryman E6i Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and LEMO 4-pin Connector for Beyerdynamic Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a LEMO 4-pin connector for direct connection to Beyerdynamic TS 316, TS 400, and TS 600 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Beyerdynamic Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. It will works solo with Sony A7r2 and Sony HVL-F43M, or a receiver its mandatory?

A: The Godox X1R-S TTL Wireless Flash Trigger Receiver for Sony would be needed as well. https://bhpho.to/2X0htLn

Q: 2. Can I fully control the speed light settings from a Yongnuo YN-622N-TX wireless controller mounted on camera?

A: Yes, it is compatible and you can control from the camera the flash with the YN-622But the flash you picked is for Canon and the correct 622C is, Yongnuo YN-622C-TX E-TTL Wireless Flash Controller for Canon B&H # YOYN622CTX MFR # YN-622C-TX

Q: 3. Hi, Is this compatible with both Mamiya RZ67 and Fujifilm GFX?

A: The Vello FreeWave LR Wireless Flash Trigger and Receiver Kit may be used on the hot shoe located on the side of the Mamiya RZ 67 or on the hot shoe on top of a Fujifilm GFX camera.

Q: 4. This product is compatible with panasonic GH3?

A: Yes it should work but this product is made to be used as a Remote Shutter; Vello FreeWave Wireless Remote Shutter Release for Canon and Panasonic Kit B&H # VERWC2PK

Q: 5. I have a neewar vision; can i use this trigger for that flash?

A: This product is only compatible with the Godox monolights and speed lights which utilize the X series radio trigger system.

Q: 6. I have a Phottix Odin Receiver and Canon flash, will this trigger work for that setup ?

A: No, the Godox XProF TTL Wireless Flash Trigger for Fujifilm Cameras is not compatible for use with the Phottix Odin TTL Flash Trigger Receiver for Canon. Godox radio wireless transmitters are only compatible for use with Godox flashes/studio strobes or receivers that have Godox's built-in X-wireless 2.4GHz wireless receiver. They are not compatible for use with third-party remote systems. If you need a wireless radio transmitter for use with the Phottix Odin TTL Flash Trigger Receiver for Canon, I would instead recommend the Phottix Odin II TTL Flash Trigger Transmitter for Canon, B&H # PH89074, or the Phottix Odin Lite Flash Trigger Transmitter, B&H # PH89090, for your usage needs.

Q: 7. Will this wireless transmitter work on a Flashpoint XPLOR 600 HSS light?

A: Yes, its the same software & frequency.

Q: 8. Does it work with Pocket Wizard?

A: Yes. As the Bolt VS-570C Wireless TTL Flash for Canon Cameras has both a PC sync terminal on the side of the unit and a Canon hot shoe on the bottom of the unit, it would be compatible with with the PocketWizard FlexTT5 Transceiver for Canon, FlexTT6 Transceiver for Canon, MiniTT1 Transmitter for Canon, and Plus IV Transceiver radio remotes with their built-in hot shoes, and with all other PocketWizard remote using their PocketWizard PC1N Locking PC Sync Cable (1') included with the radio remotes.

Q: 9. I heard that this trigger do not going down more than 1/128 in output power,and the flash it self ( AD600pro) can go down to 256, is this correct?

A: You have to enable the 256 power on the trigger

Q: 10. Is this unit compatible with a Nikon D610 and when mounted on camera, will it use the auto focus properties like the nikon flashes?

A: Yes, this flash is fully compatible with the Nikon D610 camera. It uses the AF-assist and other similar features as Nikon flashes would.