The black Countryman E6 Omnidirectional Earset Mic, Medium Gain with Detachable 2mm Cable and LEMO 4-Pin Connector for Beyerdynamic Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a LEMO 4-pin connector for direct connection to Beyerdynamic TS 316, TS 400, and TS 600 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Beyerdynamic Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is it TTL mounted on a Sony A6000?

A: Yes, the Bolt VS-50SMI can shoot in TTL on a Sony a6000.

Q: 2. Is this unit compatible with a Nikon D610 and when mounted on camera, will it use the auto focus properties like the nikon flashes?

A: Yes, this flash is fully compatible with the Nikon D610 camera. It uses the AF-assist and other similar features as Nikon flashes would.

Q: 3. is this going to be available for sony?

A: As of today, Godox XProS TTL Wireless Flash Trigger for Sony Cameras B&H # GOXPROS is expected to be available by 4/8/18.

Q: 4. Will this Godox XProC TTL Wireless Flash Trigger work with Fuji Hotshoe? Not interested in TTL, only manual.

A: Yes, the XPro C trigger could fit the Fuji X series cameras, but for the best fit to the shoe, the Godox XProF TTL Wireless Flash Trigger for Fujifilm Cameras, BH # GOXPROF should be used. It can still offer manual flash control. https://bhpho.to/2Z4DAG3

Q: 5. Will the LR transmitter trigger the Vello Captain receiver. I realize the flash would have to be on manual?

A: While the Vello Captian's transmitter will trigger the Vello LR's receiver (only when using channels 1-4), the opposite is not true; the Vello LR's transmitter WILL NOT trigger the Vello Captain receiver.

Q: 6. Using XPro-F on X-T2 with Godox TT685-F. Only shows up on Fuji LCD Menu under FlashFlash Settings as "OFF". Cannot get the camera to show "TTL". Thinking maybe I might have bad unit? I can sync XproF to Godox and test fire but camera does not seem to know it has a flash trigger on it. Any ideas?

A: Here's the solution for anyone experiencing the same problem. You camera must be set to mechanical shutter. Once it's set to MECHANICAL SHUTTER (not ES) then the camera body Flash Menu Flash Settings will display the available on/off & TTL functions for the flash unit.

Q: 7. Are the YN622N-TX and and the newer YN622N II transceivers compatible?

A: I don't see why they wouldn't be. However, I only own the YN622N TX (which I use with the YN685 via this awesome B&H bundle).

Q: 8. Greetings, just received a new Bolt VS-570N, I'm noticing there are options for additional power supplies, PC sync and Firmware upgrade. Where does one get a cable for such or are there three different cables. Thanks... Kevin

A: There are 3 different cable connections for 3 different purposes. The power supply allows you to connect a battery pack, allowing you to shoot for longer periods of time without running out of battery, and also gives you a faster recycling time from one shot to another. Check out this battery pack as an example: B&H # BOPP310. The PC sync cord connects from the camera to the flash, (assuming your camera has a PC sync) allowing you to take the flash off the camera. Here is a cable from Impact: B&H # IMPCMPCM6 If your camera does not have a PC sync, you can purchase a flash cable from Vello that allows you to do the same thing. B&H # VEOCSN3Finally, the Firmware upgrade is a USB cable that allows you to connect the flash to the computer for firmware updates that Bolt releases.

Q: 9. Is it compatible with Nissin di622?

A: While this trigger could work with the Nissin Di622, it has not been tested to our knowledge. Your results may vary.

Q: 10. Will these work on a Nikon D700 and an Alien Bees B400?

A: Yes I have the working with my Nikon D750 D7200 and D5100