The black Countryman E6 Omnidirectional Earset Mic, Medium Gain with Detachable 2mm Cable and LEMO 3-Pin Connector for Zaxcom Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a LEMO 3-pin connector for direct connection to Zaxcom TRX900AA, TRX900LA, TRX900LT, TRX900LTH, TRX900LTHS, TRX900LTS, TRXFB3, TRXLA2, TRXLA3, TRXLT3, and ZMT3 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Zaxcom Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this Godox XProC TTL Wireless Flash Trigger work with Fuji Hotshoe? Not interested in TTL, only manual.

A: Yes, the XPro C trigger could fit the Fuji X series cameras, but for the best fit to the shoe, the Godox XProF TTL Wireless Flash Trigger for Fujifilm Cameras, BH # GOXPROF should be used. It can still offer manual flash control. https://bhpho.to/2Z4DAG3

Q: 2. Are the YN622N-TX and and the newer YN622N II transceivers compatible?

A: I don't see why they wouldn't be. However, I only own the YN622N TX (which I use with the YN685 via this awesome B&H bundle).

Q: 3. Greetings, just received a new Bolt VS-570N, I'm noticing there are options for additional power supplies, PC sync and Firmware upgrade. Where does one get a cable for such or are there three different cables. Thanks... Kevin

A: There are 3 different cable connections for 3 different purposes. The power supply allows you to connect a battery pack, allowing you to shoot for longer periods of time without running out of battery, and also gives you a faster recycling time from one shot to another. Check out this battery pack as an example: B&H # BOPP310. The PC sync cord connects from the camera to the flash, (assuming your camera has a PC sync) allowing you to take the flash off the camera. Here is a cable from Impact: B&H # IMPCMPCM6 If your camera does not have a PC sync, you can purchase a flash cable from Vello that allows you to do the same thing. B&H # VEOCSN3Finally, the Firmware upgrade is a USB cable that allows you to connect the flash to the computer for firmware updates that Bolt releases.

Q: 4. Will this trigger work with Godox V1

A: Yes, the Godox XProC TTL Wireless Flash Trigger for Canon Cameras would be compatible for use with the Godox V1 Flash for Canon.

Q: 5. I don't want to assume but will it work with Canon EOS R7 Mirrorless Camera? Thank you.

A: Yes. As long as all firmware updates are in place.

Q: 6. I heard that this trigger do not going down more than 1/128 in output power,and the flash it self ( AD600pro) can go down to 256, is this correct?

A: You have to enable the 256 power on the trigger

Q: 7. Is this compatible with the Godox AD200?

A: Yes it is, I use it with my X-T2 together with two AD600.

Q: 8. is this going to be available for sony?

A: As of today, Godox XProS TTL Wireless Flash Trigger for Sony Cameras B&H # GOXPROS is expected to be available by 4/8/18.

Q: 9. Will the LR transmitter trigger the Vello Captain receiver. I realize the flash would have to be on manual?

A: While the Vello Captian's transmitter will trigger the Vello LR's receiver (only when using channels 1-4), the opposite is not true; the Vello LR's transmitter WILL NOT trigger the Vello Captain receiver.

Q: 10. I Have eos 5d mark IV and the canon speedlite 600EX and canon speedlite 320EX. If I buy Godox XProC TTL and two X1R-C TTL, will they work ok?. Thank You.

A: Yes, you may use the XPRO C Trigger on your 5D Mark IV to fire both your Canon 600EX RT and your Canon 320EX with a Godox X1R-C receiver on each flash.