The light beige Countryman E6 Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and 3.5mm Connector for Amplivox Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 3.5mm connector for direct connection to Amplivox S-1600T and S-1690T wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Amplivox Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Can this also trigger Nissin i60a sony?

A: From the manufacturer; XproS could NOT support Nissin i60a sony, pls note.

Q: 2. Will the LR transmitter trigger the Vello Captain receiver. I realize the flash would have to be on manual?

A: While the Vello Captian's transmitter will trigger the Vello LR's receiver (only when using channels 1-4), the opposite is not true; the Vello LR's transmitter WILL NOT trigger the Vello Captain receiver.

Q: 3. Is this XProN 100% compatible with Nikon D850 body for trigging Nikon speedlights like D600, F700 or D910? many thanks

A: This will trigger any fladh as long as you have the receiver attached to the bottom of the flash. This xproN will trigger Godox flash with radio trigger built in.

Q: 4. Will this work with the Canon 470ex-ai?

A: The Canon 470EX-AI does not have a wireless receiver built in. If you use a Godox receiver you can use it with a XPro. https://bhpho.to/2sVXeE7

Q: 5. Does the XProN Trigger Kit wireless control all features of either the following flashes: Godox TT685N Thinklite TTL Flash, OR Godox VING V860IIN TTL Li-Ion Flash?

A: Yes it controls them in TTL and manual.

Q: 6. does this work with the Canon ST-E3-RT?

A: The Phottix Laso TTL Flash Trigger Receiver for Canon B&H # PH89091 can be placed at the bottom of this flash so that the Canon ST-E3-RT can fire it.

Q: 7. Can this trigger be used/work with Sony Flash HVL-43M?

A: You would need a receiver. http://bhpho.to/2Gh8EpU

Q: 8. Will a FujiFilm X100v with the Godox XproF trigger work with canon exII flashes if a fuji receiver is attached the flashes? (not even sure they make the receivers).

A: If there is Fuji receiver, it probably can use Xpro F to trigger the Canon EXII flash. But they do not have Fuji receiver. Right now, they only have a receiver for Canon/Nikon/Sony.

Q: 9. I heard that this trigger do not going down more than 1/128 in output power,and the flash it self ( AD600pro) can go down to 256, is this correct?

A: You have to enable the 256 power on the trigger

Q: 10. Will it work with the Godox X1R-S receiver?

A: Yes, it will work with the X1R-S.