The cocoa Countryman E6i Directional Earset Mic, Medium Gain with Detachable 1mm Cable and 3.5mm locking Connector for Senal Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6i earset's cable terminates to a 3.5mm locking connector for direct connection to Senal AWS-2000T wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Senal Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will This Trigger Work With A TT685s

A: Yes, the Godox XPro S can trigger the Godox TT685S.

Q: 2. I just purchased the XProN and only group A, B and C can be set to TTL group D and E can only be set in manual mode, is this normal?

A: Yes that is normal

Q: 3. In M While each group has a different power level, is it possible to adjust the power of ALL GROUPS simultaneously?

A: Yes. For more assistance feel free to reach out to our live chat agents for the best hand on assistance in the industry. https://bhpho.to/3NikaRL

Q: 4. Would this be fully compatible with the Canon eos R7?

A: Yes. With all firmware updates in place both camera and commander yes unit works great reading the TTL protocol system.

Q: 5. Will this trigger work with the godox ad400 pro?

A: yes

Q: 6. Can you have two cameras, each with their own xPro, control the same flash at the same time (at an event, for example)?

A: Yes it will. You can also set the triggers so that one camera or the other or both are controlling the flash levels.

Q: 7. Will this work with a Canon 1DX mk III? My old Pocket Wizards will not work with the 1DX mk III

A: Yes. The following system will work with canon e-ttl metering system. Depending on whihc pocket wizard being used it could need to be updated with the latest firmware. We suggest contacting manufacture for support.

Q: 8. What does this do that the X1T or X2T don't do?

A: It has an easier menu to navigate

Q: 9. will this Transmitter work with the Canon 40D ?

A: Yes, the Godox XProC TTL Wireless Flash Trigger for Canon Cameras would be compatible for use with the Canon EOS 40D DSLR Camera, as indicated on page 45 of the Godox XProC TTL Wireless Flash Trigger for Canon Cameras' instruction manual.

Q: 10. Is There a updated one for the canon r3 I think it would be xproc II but can not find it Thank you

A: At t his time there is only the version one, Godox XProC TTL Wireless Flash Trigger for Canon Cameras. The Version two that are out now is for Leica.