The tan Countryman E6 Directional Earset Mic, Low Gain with Detachable 1mm Cable and 3.5mm Locking Connector for Sennheiser Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a 3.5mm locking connector for direct connection to Sennheiser SK 2020-D wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Sennheiser Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this work with the Sony a900 with the proprietary minolta shoe?

A: This is designed for the MIS and is not compatible with the Minolta shoe.

Q: 2. Does the XProN Trigger Kit wireless control all features of either the following flashes: Godox TT685N Thinklite TTL Flash, OR Godox VING V860IIN TTL Li-Ion Flash?

A: Yes it controls them in TTL and manual.

Q: 3. Will this trigger work with the godox ad400 pro?

A: yes

Q: 4. I heard that this trigger do not going down more than 1/128 in output power,and the flash it self ( AD600pro) can go down to 256, is this correct?

A: You have to enable the 256 power on the trigger

Q: 5. What adapter will allow this to be mounted on Sony a37 with the older iISO shoe and still have full TTL/p-ADI functionality?

A: You are in luck. Here is the adapter, with TTL, that you are looking for. Vello HSA-CSASM Sony/Minolta to Sony Multi-Interface Shoe Adapter B&H # VEHSACSASM.

Q: 6. Please, I don't understand the difference between these Godox triggers: X1T and XPro? Is XPro the new improved version of X1T? Can the XPro, camera mounted, control the following flashes: TT350, TT685 and AD200? Thank you!

A: All of then have the same functionality to trigger and adjust all Godox X2 series flashes and strobes. Even the older versions can be firmware updated to work with current Z series cameras. The X1T is a lower profile device that sits on the hot shoe and allows a flash to be stacked on top. The XPro has a larger screen and more physical controls for making adjustments quickly. There are two versions of each style that are functionally identical just with different button layouts, however, the old version of the X1T is no longer sold as far as I can tell.

Q: 7. Will this work with a Canon 1DX mk III? My old Pocket Wizards will not work with the 1DX mk III

A: Yes. The following system will work with canon e-ttl metering system. Depending on whihc pocket wizard being used it could need to be updated with the latest firmware. We suggest contacting manufacture for support.

Q: 8. Can NiMh batteries be used in the Godox XPro N?

A: Rechargeable Ni-MH batteries like the Eneloop can be used with the Godox XProN TTL Wireless Flash Trigger for Nikon Cameras BH #GOXPRON.

Q: 9. Does it work with the newer OM1 cameras?

A: The Vello FreeWave LR Wireless Flash Trigger and Receiver Kit is compatible with the OM SYSTEM OM-1 Mirrorless Camera.

Q: 10. Will this work with a Canon 580ex?

A: No, you would need a flash with a radio signal built in or you can attach a Godox radio receiver to the flash.