The light beige Countryman E6 Omnidirectional Earset Mic, Standard Gain with Detachable 2mm Cable and 3.5mm Locking Connector for Sennheiser Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 3.5mm locking connector for direct connection to Sennheiser SK 2020-D wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Sennheiser Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is this XProN 100% compatible with Nikon D850 body for trigging Nikon speedlights like D600, F700 or D910? many thanks

A: This will trigger any fladh as long as you have the receiver attached to the bottom of the flash. This xproN will trigger Godox flash with radio trigger built in.

Q: 2. Having just moved over to the Sony a7riv from Nikon, and having multiple Nikon SB800 flashes, will this trigger for the Sony fire the Nikon flashes and what other accessories would I need to get to make this happen?

A: Yes with Nikon receivers # GOX1RN

Q: 3. Is this compatible with the Godox AD200?

A: Yes it is, I use it with my X-T2 together with two AD600.

Q: 4. will godox XProN work on Nikon z6?

A: The Godox Xpro N will work with a Nikon Z 6.

Q: 5. Will it work with the Godox X1R-S receiver?

A: Yes, it will work with the X1R-S.

Q: 6. Does this trigger works with all their capabilities with the Sony a6500 camera ?

A: Yes this trigger is fully compatible with the Sony A6500.

Q: 7. What adapter will allow this to be mounted on Sony a37 with the older iISO shoe and still have full TTL/p-ADI functionality?

A: You are in luck. Here is the adapter, with TTL, that you are looking for. Vello HSA-CSASM Sony/Minolta to Sony Multi-Interface Shoe Adapter B&H # VEHSACSASM.

Q: 8. where can I get an owners manual?

A: I googled and found this site: https://fccid.io/pdf.php?id=2943363 That's the manual I have in paper - so it's identical

Q: 9. This transmitter can work with canon 600EX RT without external Godox receiver?

A: Unfortunately, the receiver inside of the Canon 600EX RT flash cannot be triggered using the XPro C Transmitter without using the Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon B&H # GOX1RC. Another transmitter than can fire the internal receiver of the Canon 600EX RT is the Phottix Laso TTL Flash Trigger Transmitter for Canon B&H # PH89092.

Q: 10. Can I control multiple (say 3) off camera YN-685s, with just using YN-622C-TX and without requiring all of them on YN-622C receiver?

A: You don't need the YN-622C receiver to control these flashes. They have the radio receivers built into the flash.