The light beige Countryman E6 Omnidirectional Earset Mic, Standard Gain with Detachable 2mm Cable and 3.5mm Locking Connector for Sky Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 3.5mm locking connector for direct connection to Sky UT86P wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Sky Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Compatible with Olympus OMD?

A: Yes, that will work with most cameras with a regular hotshoe. The Flash Trigger LR is not TTL. It is manual so it will work with strobes and moonlights. And with speedlights that have a manual function.

Q: 2. Can I use the Tx on one Canon DSLR to release the shutter on another Canon DSLR (with the Rx mounted)?

A: This is not a wireless shutter but a wireless sync for flashes.To do what you want you will need a different wireless shutter. And as for the one that works it depends on the model camera you have.The one listed below will allow you to put the transmitter on of the cameras hotshoes and the receiver is connected to the other cameras shutter port. This is a list of the Canon cameras it works with, Canon EOS: 10D, 20D, 30D, 40D, 50D, 5D, 5D Mark II, 5D Mark III, 6D, 7D, 7D Mark II, 1D, 1D Mark II, 1D Mark II N, 1D Mark III, 1D Mark IV, 1Ds, 1Ds Mark II, 1Ds Mark III, 1D X, 1D C, Elan series, Digital Rebel (300D), XT (350D), XTi (400D), XSi (450D), T1i (500D), T2i (550D), T3 (1100D), T3i (600D), T4i (650D), T5 (1200D), T5i (700D), T6i (750D), T6s (760D), SL1 (100D) and XS (1000D), 60D & 70D; PowerShot G10, G11, G12, G15, G16 & G1 X

Q: 3. Hi. Which Godox flashes is the Xpro P compatible with? I have the AD600BM and AD360 MK One

A: Being that both the AD600BM and the AD360 have the Godox X series receiver built in, you may trigger them using the XProP transmitter placed on your Pentax camera.

Q: 4. Can I use the Godox Xpro F to trigger a off-camera Godox V860IIN? Will if work with other Nikon flashes?

A: When triggering a Godox flash you can trigger a Nikon or other brand flash and The transmitter will take care of the communication. It only has control of Godox flashes or when using receivers, flashes of the same type as the controller.

Q: 5. Do I need to plug the flash in to the receiver or can I just put it on a hotshoe

A: Any way that is convenient. You can put the flash on to the hot shoe if it is that type of flash or if it is a studio type flash you need to use the supplied cord. Remember this is a manual flash not auto so you have to test or use a flash meter

Q: 6. Is There a updated one for the canon r3 I think it would be xproc II but can not find it Thank you

A: At t his time there is only the version one, Godox XProC TTL Wireless Flash Trigger for Canon Cameras. The Version two that are out now is for Leica.

Q: 7. Will a FujiFilm X100v with the Godox XproF trigger work with canon exII flashes if a fuji receiver is attached the flashes? (not even sure they make the receivers).

A: If there is Fuji receiver, it probably can use Xpro F to trigger the Canon EXII flash. But they do not have Fuji receiver. Right now, they only have a receiver for Canon/Nikon/Sony.

Q: 8. Can this trigger be used/work with Sony Flash HVL-43M?

A: You would need a receiver. http://bhpho.to/2Gh8EpU

Q: 9. Can this printer perform auto 2 sided copy or do you have to remove the paper and flip it manually?

A: Yes, the Epson EcoTank Pro ET-5150 Wireless All-in-One Supertank Printer supports automatic dual sided printing and scanning.

Q: 10. Does it work with fujifilm xt200?

A: Yes it will work.