The cocoa Countryman E6i Directional Earset Mic, Standard Gain with Detachable 2mm Cable and LEMO 4-pin Connector for Beyerdynamic Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6i earset's cable terminates to a LEMO 4-pin connector for direct connection to Beyerdynamic TS 316, TS 400, and TS 600 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Beyerdynamic Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Does the signal from this work underwater in a waterproof camera/flash housing?

A: I don't use them under water but I don't see why not. They work great! !! :-) good luck!

Q: 2. Can I sync/use two Godox SK400II-V strobes and my Westcott FJ400 via this Trigger? (Sony)

A: The Godox XProS TTL Wireless Flash Trigger for Sony Cameras cannot speak directly to the radio in the Westcott FJ400 400Ws Strobe with AC/DC Battery (US/No. America Plug), B&H # WEFJ400S. However, you can use the XProS on-camera to trigger Godox lights (with the trigger in manual mode and the camera set to 1/200th of a second). You would put the FJ400 lights into optical-sync mode and they will fire optically when the Godox lights are triggered by the on-camera XProS.

Q: 3. Can this flash be used as a master with the Nikon D500?

A: The pin contact of the flash must have the same pin of the hot shoes of Nikon camera as its design. It should be working.

Q: 4. My set up is a Nikon Z9 and a SB-5000 flash. I use the WR-R10/WR-T10/WR-A10 Wireless Remote for off camera flash, but want to control the flash power remotely as well. The Nikon WR-1 is $625, while this Godox is only $69. Will this work with my set up? Thanks.

A: No, the Godox XProN TTL Wireless Flash Trigger for Nikon Cameras is only for Godox brand flashes that support it.

Q: 5. Dear, I am a Nikon user with Godox. I just incorporated a Fujifilm xt3. I was able to verify that both the godox X1TN and XPro TTL work partially on the FUJIFILM XT3, as the TTL and HSS option do not recognize them with any of the flashes (ad200, ad600 or 685). Could I be informed if I am right and should only change the transmitter (XProF) or if even with a transmitter dedicated to Fuji I will have the same problem, since the flashes are for Nikon? I look forward to your comments

A: Godox flashes off camera will work if you use a Fuji controller on a Fuji camera.

Q: 6. Will this Fuji trigger work with Godox V1 for Canon? Not interested in TTL, only manual, and continuous shooting at 11fps.

A: A Godox V1 off camera does not matter which one. If the XPro remote is the correct foot for the camera its on you can do TTL HSS and have all the controls. The V1 lithium is very fast. At full power it will not keep up but as you turn it down around 1/32 it should be able to keep up with fast bursts very well.

Q: 7. Will this work with the Fuji GFX 100?

A: Yes, the Godox XProF TTL Wireless Flash Trigger for Fujifilm Cameras would be compatible for use with the FUJIFILM GFX 100 Medium Format Mirrorless Camera.

Q: 8. I have a GH5 and am planning on buying Godox SK400II. Is this trigger compatible?

A: Yes they are compatible.

Q: 9. Does TTL actually work? Before anyone answers, please check because Godox has a bad history with this unit and Sony TTL. TIA

A: I have it for canon and it works perfectly!

Q: 10. Vello FreeWave Wireless Flash Trigger LR and Receiver Kit B&H # VERFWLR MFR # RFW-LR: Will this work on the Panasonic FZ1000?

A: Yes, this trigger kit would be compatible with any camera which has a standard hotshoe like the Panasonic DMC-FZ1000.