The black Countryman E6i Directional Earset Mic, Medium Gain with Detachable 1mm Cable and 3.5mm locking Connector for Senal Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6i earset's cable terminates to a 3.5mm locking connector for direct connection to Senal AWS-2000T wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Senal Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this work with two Godox mono lights and a camera without a hotshoe? I recent got a second Godox mono light and want to use both lights with my large format camera, previously I just used the cable that came with the Godox mono light and connected one end to the light and the other end to the port on my Large Format camera but to use both lights simultaneously I need a remote trigger and receiver, trying to see if this one would work...

A: The receivers in this kit can connect to each Godox monolight. The transmitter can connect to your large format lens via the sync terminal using the Impact Miniphone Male (3.5mm) to PC Male Sync Cord (18"), BH # IM10032390. http://bhpho.to/3aTU8Vg

Q: 2. Is this comparable with the Sony A7rii ? Will this work with the radio transmitter that comes with the bare bulb bolt ?

A: This flash has the Multi-Interface Shoe, which makes it compatible with the Sony A7R II. It will not be compatible with the dedicated radio trigger for the Bolt bare bulb flashes like the VB22.

Q: 3. The zoom range is given as 24-105. Is it still effective to use for super telephoto (150-600)?

A: Just put it on 105mm and use the Guide number for that Your Telephoto lens will have a narrower field of view than the flash, so the subject will be covered up to the distance specified by the guide number.

Q: 4. Will this work with the Olympus FL-700WR Flash since it's radio wireless?

A: Unfortunately no but you can use this Olympus trigger instead. Please take a look at the following link: https://bhpho.to/2E2weEL

Q: 5. Will this Godox XProC TTL Wireless Flash Trigger work with Fuji Hotshoe? Not interested in TTL, only manual.

A: Yes, the XPro C trigger could fit the Fuji X series cameras, but for the best fit to the shoe, the Godox XProF TTL Wireless Flash Trigger for Fujifilm Cameras, BH # GOXPROF should be used. It can still offer manual flash control. https://bhpho.to/2Z4DAG3

Q: 6. Can I control with XProF TTL flash trigger 2 flashs for a Fuji XT2 a Godox V860IIF and a Nikon SB900 (adding a Godox X1RN transmitter) transmitter/receiver) in a portait studio setup ?

A: Yes off camera it will work your Nikon I believe it will only fire it if the transmitter is for a different flash system like Fuji.

Q: 7. Did Godox ever fix the WB issue caused by this trigger? Will using the Canon version on Sony, etc. prevent the WB issue?

A: All issues have been addressed with latest firmware updates.

Q: 8. Does TTL actually work? Before anyone answers, please check because Godox has a bad history with this unit and Sony TTL. TIA

A: I have it for canon and it works perfectly!

Q: 9. Will this work witH Sony A72 and HVL-F43M, HVL-F20M?

A: I just got the XProS trigger and did a quick test with my existing flashes (Godox and Sony) on my A7II: worked flawlessly with my Good AD200 flashes, no problems! However, on the Sony HVL-F43M I had to have the flash mounted on a Godox X1R-S receiver to get the flash to fire wirelessly, which wasn't a surprise to me going into it. However, I have not been able to get it to adjust the flashes output via the XPro-S transceiver mounted on the camera...it automatically adjusts the AD200's outputs. On the Sony I have to manually adjust the power output on the back of the flash in manual mode...easy enough to do, but extra steps to get there that don't thrill me. Hope this helps.

Q: 10. Is this compatible with the Godox R200?

A: The Godox R200 ringflash is an attachment for an AD200. The AD200 is compatible with this transmitter.