The tan Countryman E6i Omnidirectional Earset Mic, Low Gain with Detachable 1mm Cable and 6-pin Hirose Connector for Samson Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 6-pin Hirose connector for direct connection to Samson BT3, CT2, TX4, and UT4 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Samson Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. WILL ANY OF THE TRIGGERS WORK WIT nIKON d7500 AND WHICH FLASH?

A: This trigger Godox XProN TTL Wireless Flash Trigger for Nikon Cameras is compatible with the D7500 and you can use it with several Godox flashes that have the X radio system built in such as Godox TT685N Thinklite TTL Flash for Nikon Cameras. https://www.bhphotovideo.com/c/product/1341878-REG/godox_tt685n_ttl_camera_speedlite.html

Q: 2. Are the Godox XPROC with the Einstein 640 WS strobes?

A: They will only operate as a simple activation of your strobe if you purchase the following, Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon BH #GOX1RN • MFR #X1R-N plus Nisha Miniphone 1/8" (3.5mm) Male to Submini (2.5mm) Male Sync Cord (16") B&H # NIFSC163525 MFR # FSC163525

Q: 3. Will this work for a Nikon D3500?

A: Yes the XPro N will work with a Nikon D3500.

Q: 4. Does this work with the Sony ZV-1?

A: Yes. The system will communicate with the Sony ADI / P-TTL metering system.

Q: 5. Will this flash work with the Panasonic FZ1000?

A: Yes this flash can work with the Panasonic DMC-FZ1000.

Q: 6. Focus assist with my canon R doesn't work

A: Unfortunately, infrared AF-assist beams do not work when used on the Canon EOS R Mirrorless Digital Camera. As indicated on page 264 of the Canon EOS R Mirrorless Digital Camera's instruction manual, when using an external flash that has an AF-assist beam, a small series of flashes would be fired by the flash instead of using the AF-assist beam. It states a small series of flashes is fired even if you set the external flash's AF-assist beam emission method in the Personal Functions to infrared AF-assist beam firing. Unfortunately, as the Godox XPro-C wireless radio flash transmitter does not have a flash or emit a flash beam, there would be no AF-assist capability when using this on the Canon EOS R Mirrorless Digital Camera (however, the AF-assist beam would work when using this transmitter on a DSLR camera).

Q: 7. Does this work with the X-T3?

A: Yes, its compatible to all current Fuji cameras.

Q: 8. Will this product work with a Canon 600EX II-RT?

A: One must use the additional receiver under Your flash to be compatable. Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon B&H # GOX1RC MFR # X1R-C

Q: 9. Will this trigger both Sony and Nikon flashes if they all have Godox receivers?

A: Yes it will

Q: 10. Will this make a proper TTL exposure with remote TT685 flashes? Including A:B ratio?

A: Yes, end-users be mindful that TTL is not as effective as it is when working within a control environment.