The tan Countryman E6i Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and 1/4" Connector for Line 6 Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 1/4" connector for direct connection to Line 6 TBP06 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Line 6 Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Can this Godox XProS trigger all functions on the Godox TT350S and TT685S flash when mounted on the Sony A7III?

A: Should be fine, I'm using it on a Sony A7RIII also.

Q: 2. Will it be good for a Nikon D-700 FX ??

A: The Bolt VS-570N Wireless TTL Flash for Nikon Cameras is i-TTL compatible and would be fully compatible for use with the Nikon D700 DSLR camera.

Q: 3. Greetings, regarding the Godox XProF TTL Wireless Flash Trigger for Fujifilm Cameras. Is this trigger compatible with the Fujifilm EX-F500 Flash?

A: Short answer: no, not for wireless radio triggering.The Godox units all share a proprietary wireless protocol that is different from those employed by the OEM flashes from Fuji, Canon, Nikon, etc.. This unit is really built to act as a trigger for Godox-manufactured speedlights and strobes. (However, Godox uses the same wireless triggering protocol across all of its lights so, from everything I read, this Fuji trigger should happily work to trigger a Nikon Godox TT685N or a Canon Godox TT350C, etc., with full TTL and HSS.)It does have a sync port that can be used to connect (via a sync cable) to off-camera units but it wouldnt support TTL in that mode, and wouldnt offer any advantage over just using the PC sync port thats available on most of the Fuji X-series bodies.Hope that helps!

Q: 4. Is the Godox XPro trigger compatible with the ProMaster Pd300 code 9462 studio lighting? I’ve been told by two sources that they are but wasn’t provided information. When received nothing triggers when setup to the proper channels. Please help?

A: No, it is not compatible.

Q: 5. I have this kit plus a few extra receivers. Is there anyway to buy a different Phottix transmitter that supports HSS and use with the 3 Ares receivers I have?

A: Since HSS is a product of the TTL system in the camera which is being used, there is no way for a manual trigger such as the Phottix Ares or the Vello Freewave LR to become HSS ready. The only way to have HSS is to use a Phottix trigger such as the Odin or Odin II. Additionally, the Vello Freewave LR works on a different frequency all together, therefore cannot be triggered by another other brand of radio trigger.

Q: 6. What does this do that the X1T or X2T don't do?

A: It has an easier menu to navigate

Q: 7. Should I buy xpros or tt350s? Considering xpros is $69 and tt350S is $85, but 350s is a flash which can also trigger other flashes, would it be more economical to buy a tt350s instead?

A: Yes. unless you plan to bring in another triggering system into the same echo system as Profoto we suggest reviewing the following item so both system will work in same echo system. Godox X2 2.4 GHz TTL Wireless Flash Trigger for Nikon BH #GOX2TN • MFR #X2TN

Q: 8. Will this work with two Godox mono lights and a camera without a hotshoe? I recent got a second Godox mono light and want to use both lights with my large format camera, previously I just used the cable that came with the Godox mono light and connected one end to the light and the other end to the port on my Large Format camera but to use both lights simultaneously I need a remote trigger and receiver, trying to see if this one would work...

A: The receivers in this kit can connect to each Godox monolight. The transmitter can connect to your large format lens via the sync terminal using the Impact Miniphone Male (3.5mm) to PC Male Sync Cord (18"), BH # IM10032390. http://bhpho.to/3aTU8Vg

Q: 9. Does this trigger works with all their capabilities with the Sony a6400camera and flash godox tt3500?

A: It will work with a Sony A6400 and a Godox TT350.

Q: 10. Hello was curious if this will pair with my godox ad400 pro? I see in the specs it says godox wistro ad400 pro but I'm not sure if that's the same thing or not?

A: Yes.