The black Countryman E6 Omnidirectional Earset Mic, Standard Gain with Detachable 2mm Cable and 2.5mm Waterproof Locking Connector for Lectrosonics Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 2.5mm waterproof locking connector for direct connection to Lectrosonics WM wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Lectrosonics Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. will this work with rebel T7?

A: The XPro C will work with a Rebel T7.

Q: 2. Will this make a proper TTL exposure with remote TT685 flashes? Including A:B ratio?

A: Yes, end-users be mindful that TTL is not as effective as it is when working within a control environment.

Q: 3. Does this work with the Sony ZV-1?

A: Yes. The system will communicate with the Sony ADI / P-TTL metering system.

Q: 4. Can this Godox XProS trigger all functions on the Godox TT350S and TT685S flash when mounted on the Sony A7III?

A: Should be fine, I'm using it on a Sony A7RIII also.

Q: 5. Will this product work with a Canon 600EX II-RT?

A: One must use the additional receiver under Your flash to be compatable. Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon B&H # GOX1RC MFR # X1R-C

Q: 6. I have a Canon Mark 5D III, a Rotalux softbox, and an Alien Bee 1600 light. Will this work with everything?

A: Yes. you just need the correct wires

Q: 7. WILL ANY OF THE TRIGGERS WORK WIT nIKON d7500 AND WHICH FLASH?

A: This trigger Godox XProN TTL Wireless Flash Trigger for Nikon Cameras is compatible with the D7500 and you can use it with several Godox flashes that have the X radio system built in such as Godox TT685N Thinklite TTL Flash for Nikon Cameras. https://www.bhphotovideo.com/c/product/1341878-REG/godox_tt685n_ttl_camera_speedlite.html

Q: 8. Will this flash work with the Panasonic FZ1000?

A: Yes this flash can work with the Panasonic DMC-FZ1000.

Q: 9. Does this work with the Newer 16 Channel Wireless receivers (the long one with the physical 4 switches to select channels)?

A: The Godox XPro trigger is only compatible with Godox receivers.

Q: 10. Greetings, regarding the Godox XProF TTL Wireless Flash Trigger for Fujifilm Cameras. Is this trigger compatible with the Fujifilm EX-F500 Flash?

A: Short answer: no, not for wireless radio triggering.The Godox units all share a proprietary wireless protocol that is different from those employed by the OEM flashes from Fuji, Canon, Nikon, etc.. This unit is really built to act as a trigger for Godox-manufactured speedlights and strobes. (However, Godox uses the same wireless triggering protocol across all of its lights so, from everything I read, this Fuji trigger should happily work to trigger a Nikon Godox TT685N or a Canon Godox TT350C, etc., with full TTL and HSS.)It does have a sync port that can be used to connect (via a sync cable) to off-camera units but it wouldnt support TTL in that mode, and wouldnt offer any advantage over just using the PC sync port thats available on most of the Fuji X-series bodies.Hope that helps!