The cocoa Countryman E6 Omnidirectional Earset Mic, Standard Gain with Detachable 1mm Cable and 3.5mm Connector for Amplivox Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 3.5mm connector for direct connection to Amplivox S-1600T and S-1690T wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Amplivox Transmitters    Headroom for General Speaking    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this work with two Godox mono lights and a camera without a hotshoe? I recent got a second Godox mono light and want to use both lights with my large format camera, previously I just used the cable that came with the Godox mono light and connected one end to the light and the other end to the port on my Large Format camera but to use both lights simultaneously I need a remote trigger and receiver, trying to see if this one would work...

A: The receivers in this kit can connect to each Godox monolight. The transmitter can connect to your large format lens via the sync terminal using the Impact Miniphone Male (3.5mm) to PC Male Sync Cord (18"), BH # IM10032390. http://bhpho.to/3aTU8Vg

Q: 2. Is this compatible with Canon 80D & Canon Speedlite 540 EZ flash?

A: Yes.

Q: 3. Does this work with the X-T3?

A: Yes, its compatible to all current Fuji cameras.

Q: 4. I have a Canon Mark 5D III, a Rotalux softbox, and an Alien Bee 1600 light. Will this work with everything?

A: Yes. you just need the correct wires

Q: 5. Will this product work with a Canon 600EX II-RT?

A: One must use the additional receiver under Your flash to be compatable. Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon B&H # GOX1RC MFR # X1R-C

Q: 6. Focus assist with my canon R doesn't work

A: Unfortunately, infrared AF-assist beams do not work when used on the Canon EOS R Mirrorless Digital Camera. As indicated on page 264 of the Canon EOS R Mirrorless Digital Camera's instruction manual, when using an external flash that has an AF-assist beam, a small series of flashes would be fired by the flash instead of using the AF-assist beam. It states a small series of flashes is fired even if you set the external flash's AF-assist beam emission method in the Personal Functions to infrared AF-assist beam firing. Unfortunately, as the Godox XPro-C wireless radio flash transmitter does not have a flash or emit a flash beam, there would be no AF-assist capability when using this on the Canon EOS R Mirrorless Digital Camera (however, the AF-assist beam would work when using this transmitter on a DSLR camera).

Q: 7. Will this work with the XT 3

A: This trigger is compatible with the Fuji X series mirrorless cameras like the X-T3.

Q: 8. Will this work for a Nikon D3500?

A: Yes the XPro N will work with a Nikon D3500.

Q: 9. Are the Godox XPROC with the Einstein 640 WS strobes?

A: They will only operate as a simple activation of your strobe if you purchase the following, Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon BH #GOX1RN • MFR #X1R-N plus Nisha Miniphone 1/8" (3.5mm) Male to Submini (2.5mm) Male Sync Cord (16") B&H # NIFSC163525 MFR # FSC163525

Q: 10. Does Godox xproc ttl triger work for panasonic lumix dc-s1r?

A: The Godox XProC TTL Wireless Flash Trigger for Canon Cameras listed above is not designed for use on the Panasonic Lumix S1R Mirrorless Camera; it is designed for use on Canon cameras that uses Canon's E-TTL II automatic exposure system. The Godox XProO TTL Wireless Flash Trigger for Olympus and Panasonic Cameras, B&H # GOXPROO, would instead be the correct radio transmitter designed for use with the Panasonic Lumix S1R Mirrorless Camera. While you may mount the Godox XProC TTL Wireless Flash Trigger for Canon Cameras on the Panasonic Lumix S1R, the trigger will only work as a fully manual wireless radio trigger as Canon's E-TTL II automatic exposure system does not communicate with Panasonic's TTL system.