The Countryman E6 Flex Omnidirectional Microphone combines the springy, form-fitting ear grips of the E6, with the flexible and durable boom of the E6i earset microphone. With these features, the E6 Flex provides virtually invisible operation in stage performances, trade shows, houses-of-worship, auctions, lectures and much more.

The omnidirectional pattern is the most versatile, providing a wide pick up area that forgives imperfect microphone placement, while minimizing extraneous noise. Flexible microphone positioning is maintained and the included windscreen minimizes the wind noise often associated with cardioid microphones.

A wide variety of colors and connections are available for use with various wireless transmitters. This version is tan and the cable terminates to a standard XLR male connector for use in preamps, mixers, etc.

Cable with Standard XLR Connector    Slim Springy Ear Grips of E6    Flexible Boom of E6i    2mm Diameter Duramax Cable    For Speech & Vocals    Tan

A miniature capsule is mounted to a low-profile, flexible frame. This lightweight, unobtrusive design is available in various colors that virtually render the entire microphone invisible against the skin.

The included removable, quick-swap cable detaches from the actual headset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy, as they are available in a wide selection of connections to accommodate various wireless transmitters.

The omnidirectional pattern is the most versatile, providing a wide pick up area that forgives imperfect microphone placement, while minimizing extraneous noise. The flexible boom provides a stiff fit that maintains its shape for single user applications. The E6 Flex is also available in a cardioid version for maximum off-axis noise rejection in environments with high feedback and noise.

This E6 Flex's sensitivity response is optimized to accurately capture speech and strong vocals without noise and distortion.

The fit of the classic E6 meets the flexibility of the E6i. The front boom is like an E6i, the ear section is like the classic E6, the result is the best fitting easiest to use earset available.

Countryman Earsets are the smallest, lightest, and least visible head-worn microphones. The E6 Flex comes in four skin tones to disappear against the face.

Changeable protective caps let you switch between cardioid and hypercardioid patterns in seconds.

Frequency response is better than 30Hz to 15kHz with smooth off-axis response and >100dB dynamic range. Countryman Earsets sound like world-class, full size performance mics but the performer has complete freedom.

The E6 Flex is exceptionally resistant to makeup, sweat and moisture when used with the supplied protective caps. The skin-colored, almost unbreakable boom resists water, sweat, and makeup and can be bent and re-bent many times to fit different performers. The front boom of the E6 Flex is slightly firmer than the E6i, so it's easily shaped right on the performer's face and smoothes out for a professional look.

The E6 Flex comes in three sensitivities for different speaking or singing styles, with up to 140dB SPL capability.

With other microphones a worn cable requires purchasing a completely new mic. An E6 Flex replacement cable easily replaces it in less than a minute. Quick-connect miniature 1mm or 2mm super-rugged cables are available in four colors for almost any wireless transmitter or phantom mic input providing 3 - 48V.

Related Questions and Answers

Q: 1. If you are using tools like focus peaking or false color on the monitor are you still able to output a clean image or are the tools output too?

A: On a professional monitor like this it is usual for it to be able to out put clean video (SDI only in this case). "HDMI input and SDI input and loop output ports with the ability to output a superimposed image with 3DLUT and peaking via the SDI output" This implies it also has the ability to NOT superimpose LUTS/peaking.

Q: 2. Hi, does this monitor have an active cooler? Is it weather-sealed or does it have some openings in the chassis? Thanks!

A: The PORTKEYS BM5WR 5.5" HDMI Touchscreen Monitor with Camera Control, like most monitors is not weather-sealed nor does it have a cooling fan.

Q: 3. Will this allow you to control the audio levels on the BMDCC 6k?

A: No, the PORTKEYS BM5 III WR 5.5" HDMI Touchscreen Monitor with Camera Control does not support remote audio control over the BMCC 6K.

Q: 4. I understand that camera controls can be done wirelessly for the Komodo, but is the image signal also wireless or is a SDI still needed?

A: Only controls are supported by the wireless unit. All video feed is via sdi inputs.

Q: 5. Can I use the SDI loop out to connect to a teradek if I'm shooting on Komodo? Thanks!

A: The SDI loop out on the PORTKEYS BM5WR 5.5" HDMI Touchscreen Monitor with Camera Control is for this task or similar.

Q: 6. Can we control Komodo through cable connection by portkeys? . I don't trust wifi connection on sets. Otherwise my smartphone is enough.

A: Yes, however, Portkeys has yet to release a cable.

Q: 7. Does he comes with power cable or I have to buy one? thank you

A: Yes, the PORTKEYS BM5 III WR 5.5" HDMI Touchscreen Monitor with Camera Control comes with the 4-Pin Aviation to DC Power Cord (16").

Q: 8. Will this work with a Nikon Z9?

A: As of this moment Portkeys does not offer Nikon camera control with the BM5WR 5.5" display models.

Q: 9. Will this work with the Red V-Raptor?

A: In terms of sending a video signal, yes, the PORTKEYS BM5 III Monitor with Camera Control for RED KOMODO will work with the RED V-Raptor. Camera control is exclusive to the RED Komodo with this monitor. The RED DIGITAL CINEMA DSMC3 RED Touch 7.0" LCD Monitor is an essential accessory.

Q: 10. Has the BM5 III been tested with the Red Komodo using the included control cables?

A: The PORTKEYS BM5 III 5.5" HDMI Touchscreen Monitor with Wired Camera Control controls the RED Komodo wirelessly only.