The light beige Countryman E6X Directional Earset Mic, Low Gain with Detachable 1mm Cable and LEMO 3-pin Connector for WisyCom Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6X earset's cable terminates to a LEMO 3-pin connector for direct connection to WisyCom MTP30, MTP40, MTP40S, MTP41, and MTP41S wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits WisyCom Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Does this work with PROFOTO LIGHT ?

A: The Sekonic Speedmaster L-858D-U Light Meter is compatible with all strobes whose output power can be set manually as the light meter measures strobe output either by triggering the strobe via a connected sync cable connected from the strobe unit to the light meter's PC sync terminal, or by setting the strobe to Cordless Flash Mode and manually triggering your strobe. If you have a wireless transmitter/transceiver, you can connect the transmitter/transceiver to the light meter's PC sync terminal. You may then connect a wireless receiver/transceiver to your strobe (or your strobe may have a built-in receiver), and once you press the TEST button on the light meter, it will trigger the strobe wirelessly. The Sekonic Speedmaster L-858D-U Light Meter can be used with Profoto strobes either by connecting the strobe to the meter via a PC sync cable, by connecting a wireless transmitter/transceiver to the meter, or by using the light meter’s Cordless Flash Mode and triggering the flash manually.

Q: 2. Bought this & ordered 1-more LED light. Any link for light stand almost the same as this?

A: The stands that came with the COMER Radiance 360 On-Camera LED Panel (3-Light Kit) are not sold separate. But these are some options that will work with the light, https://bhpho.to/47xCAJ7.

Q: 3. What is the light output roughly in watts?

A: The ikan iLED312-v2 is equivalent to a 300 watt light.

Q: 4. Has anyone purchased the COMER Radiance 360 On-Camera LED Panel 3-Light Kit I would know the power adapter specifications I like to buy separate power adapters, but I wanna make sure that I get the correct voltage and amperage thanks.

A: The COMER Radiance 360 Variable Color LED On-Camera Light (2500 to 9900K) includes a travel charger with an AC input of 100V-240V - 50/60Hz, Max 150mA and an outout of DC 8.4V- 60.0mA. The included battery is 7.4V and 6600mAh with 48.8Wh. The light has a 7-16.8 V DC that works great with the Watson Pro 12V 2A Power Supply (2.1mm). https://www.bhphotovideo.com/c/product/1411731-REG/watson_ps_12v2a_21_12v_2a_power_supply.html

Q: 5. Does the phone attachment fit an iPhone 14 Pro Max?

A: Yes, the phone adapter that comes with the GVM TL15RS RGB Bi-Color Smartphone Video Camera Rig Light will open to fit your iphone 14 Max Pro.

Q: 6. What is the wattage draw?What is the input voltage range for the coax ?Can I use the coax input for an alternate battery power input?

A: The Ikan iLED312 has a wattage draw of 14 watts @5600/3200 and 24 watts @ 4400K The be powered from Sony L Series DV Batteries. The light has two battery attachments in the rear. Alternatively you can use the Ikan Anton Bauer battery adapter cable to power this light from an Anton Bauer Power Tap connection B&H # AB101. The input voltage is 7.4-14.8 VDC for the Coax input. (this is important if powering the light from a brick battery)

Q: 7. How many centimeters or inches are the inner and outer dimensions?

A: The interior measurements for the CB-33 are 52 x 36 x18 cm while the exterior dimensions are 55 x 39 x 24 cm.

Q: 8. Any recommendations for a softbox that may fit this Comer light?

A: There is no softbox made that fits the COMER Radiance 360 Variable Color LED On-Camera Light (2500 to 9900K). One can use diffusion gels to soften the the light. This is some gel options, https://bhpho.to/3MvZF6u.

Q: 9. How's the color accuracy for those who actually used it? Bought it on Cyber Monday and noticed thee CRI is somewhat low. Debating if I should return these now seeing other panels offers CRI of 95 and more bulbs at around the same price.

A: I have nothing to compare it to my first LED light but the color seems fine, especially since the temperature is adjustable.

Q: 10. Can I select 2 out of 3 light groups to flash at once? Or is it only one or all?

A: The Godox module in the Sekonic L-858D-U Speedmaster Light Meter Kit with Transmitter Module for Godox allows you to access the Groups like the standard Godox transmitter.