The cocoa Countryman E6X Omnidirectional Earset Mic, Low Gain with Detachable 1mm Cable and TA4F Connector for Shure Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a TA4F connector for direct connection to Shure AD1, ADX1, AXT100TA4F, GLXD1, PGXD1, QLXD1, and ULXD1 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Shure Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will the Nikon controller work with a Godox 685S for Sony?

A: Godox TT685, V80 and V1 can be used across the brand lines and will work.

Q: 2. Will it operate the af-540fgz?

A: This transmitter is designed to work with Godox X series receivers or Godox lights with the receiver built in.

Q: 3. will this work on the canon r3?

A: it has not been tested but technically the Godox XProC TTL Wireless Flash Trigger for Canon Cameras will work on the Canon R3. But you will need the Canon AD-E1 Multi-Function Shoe Adapter, https://bhpho.to/3sqLfdx .

Q: 4. I have a Canon 1ds Mk3, the Godox R2Pro, an AD600 and a Canon 580 speed light. How would I trigger the camera and both flashes remotely/not at the camera?

A: You would need Godox X1R-C for Canon 580 Speedlight Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon BH #GOX1RC

Q: 5. Is it compatible with Canon Rebel t5i (700D)?

A: Yes, it's fully compatible with the t5i.

Q: 6. Can I use this with a mix of V1s and Canon Speedlight 580s?

A: Yes. Canon units will need to be driven in slave mode.

Q: 7. Will this work with a non canon Godox flash?

A: Yes this transmitter can fire Godox flashes.

Q: 8. Is the Godox XPro-N TTL Wireless Flash Trigger compatible with the NIKON Z6 Mirrorless camera?

A: This transmitter can work on the Nikon Z6.

Q: 9. Does it work with a sony a6300 and sony a7iv?

A: Yes.

Q: 10. Will this work on a Fujifilm GFX50R and the AD100?

A: Yes this will work with that combination.