The beige E6 Omnidirectional Earset Mic, Highest Overload, with Detachable 2mm Cable and TA4F Connector for Electro-Voice Wireless Transmitters from Countryman is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. It is a water- and wind-resistant microphone that can be used on either ear for capturing audio in houses of worship, theater, or outdoor vocal and speech applications.

The low-profile, omnidirectional E6 Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 to your skin tone for minimum visibility.

In addition, the E6 Earset features three omni caps (very bright +8 dB, bright +4 dB, and flat +0 dB) that deliver response characteristics for most other applications such as recording flute and violin. The E6 Earset is available as a directional microphone too with cardioid and hypercardioid caps. This omnidirectional E6 Earset's cable terminates to a TA4F connector for direct connection to an Electro-Voice 2000 Series or 2500 Series wireless bodypack transmitter.

For Vocals and General Speaking    Detachable 2mm Cable    TA4F (EV), See Description    20 Hz to 20 kHz Frequency Response    Headroom for Strong Vocals    Includes +8, +4, and +0 dB EQ Caps    Windscreen    Cable Clips    Carrying Case

The Countryman E6 head-worn Earset is small and lightweight, and is hardly visible from a distance.

The E6 Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.

The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. Their protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 140 dB SPL capability.

The E6 provides high-quality audio with low distortion and an SPL of up to 140 dB. It delivers rich, full band audio quality.

Easy adjustment keeps the mic in a position for rejecting unwanted sounds. Countryman's omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.

An E6 replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.

For strong vocals.

Related Questions and Answers

Q: 1. Does it work with a sony a6300 and sony a7iv?

A: Yes.

Q: 2. Will this work on a Nikon FM10 film camera to trigger V860IIF speedlites? (Fuji Version)

A: The Godox XProN TTL Wireless Flash Trigger for Nikon Cameras should work on the Nikon FM10 to set off the Godox V860IIF. You will need to set in the menu of the trigger to use the center pin only. And the flash will be manual only. It will not support TTL or HSS.

Q: 3. I'm using the X Pro C with my R5 to trigger several off-camera Godox strobes/flashes. My experience is that all strobes must be on the same Channel (e.g., Channel 1). If I assign some to Channel 1 and others to Channel 2, I cannot fire both channels simultaneously. Only the channel that is active on the trigger fires. Am I missing something or is it not possible to fire multiple channel simultaneously? Thanks.

A: Only the channel that is selected on the transmitter can fire those strobes. channel 1 on transmitter will fire only those lights on channel. You can use different to turn light on and off.

Q: 4. I cannot get my XPro C to trigger my X1c receiver mounted to a Canon 430EXIII-RT flash. Channel and group confirmed same on both, anyone else run into this?

A: If both the Godox XProC TTL Wireless Flash Trigger for Canon Cameras and the rGodox X1R-C TTL Wireless Flash Trigger Receiver for Canon are set to the same channel and group, the only other recommendation I would have is to make sure both the transmitter and the camera are off, then connect the transmitter to the hot shoe on the camera. Make sure you turn on the TRANSMITTER first, THEN power on the camera. On the speedlite flash, make sure the mode on the speedlite is set to M for Manual Mode, not E-TTL or any other setting. I would also recommend to press the TEST button on the transmitter to ensure the transmitter is communicating with the receiver and firing your flash.

Q: 5. Just to clarify, this flash trigger works on a Pentax K1 and other K-series camera?

A: Yes, the XProP Trigger is for Pentax DSLR cameras such as the K1 and others.

Q: 6. Can I use these to fire a remote camera as I simultaneiusly fire my hand held camera? One X Pro mounted to hand held, and one mounted to remote cam, with (assumingly necessary) a sync cord?

A: Yes you can use Godox XProC TTL Wireless Flash Trigger to dedicated camera hot shoe and trigger other cameras using the Godox X1R-C TTL Wireless Flash Trigger Receiver on your 2nd camera. You will need to use the trigger cable available in the box of Godox receiver.

Q: 7. Will this flash work with the Pocket Wizard Flex TT5 units for Nikon and let you use both the TTL and manual features on the flash unit and the TT5?

A: Yes, the Bolt VS-570N Wireless TTL Flash for Nikon Cameras should be compatible for use with the PocketWizard FlexTT5. If you wish to set the flash power manually, you would set the output power on the flash itself. If you wish to use i-TTL, you would leave the flash set to i-TTL, and the FlexTT5 would control the flash's output power automatically.

Q: 8. Will this work with Impact brand strobes?

A: This transmitter will work only with Godox strobes and dedicated flash units. In order to trigger off your impact strobes please look into the following Impact PowerSync Mini Transmitter and Receiver Kit https://bhpho.to/3sB3Rqb

Q: 9. Can I use this with a mix of V1s and Canon Speedlight 580s?

A: Yes. Canon units will need to be driven in slave mode.

Q: 10. Is the Godox XPro-N TTL Wireless Flash Trigger compatible with the NIKON Z6 Mirrorless camera?

A: This transmitter can work on the Nikon Z6.