The NEMA type PE1324B 24-Outlet Energy PDU from Aten contains 24 IEC C13 AC outlets. This power distribution unit features a space-saving 0U design that allows it to be mounted vertically on the outside of a rack, resulting in a more efficient use of space in the server room. Also included on the power strip are one NEMA L6-30P inlet and two RJ-45 female Energy Sensor Ports.

The PE1324B Energy PDU can be integrated into an installation with an optionally purchased EC1000 Energy Box. This allows you to monitor the real-time current and environmental conditions of the Energy PDU from the front panel of the EC1000 at the rack, or via a Web GUI remotely - making your server room efficiently green with minimal effort.

Space saving 0U rack mount design

Real-time PDU current monitoring when used in conjunction with the EC1000 Energy Box (optional)

Related Questions and Answers

Q: 1. Can I charge the eneloop pro AA 2550mAh optimally on this charger? I mean, full-fast charge, like with the eneloop charger...

A: It will charge the 2550 mAh eneloop batteries faster than the eneloop Pro charger. Eneloop Pro AAs will fully charge in less than 9 hours.

Q: 2. Does each output handle 15A? In other words, 15 * 8 = 120A collective

A: The CyberPower PDU41004 Switched PDU is rated at 15 Amperes total for the unit.

Q: 3. Is this made out of the cheap and stiff PVC or Silicon? Example, the cord for the Aputure Nova P300c is silicon.

A: The Hosa Technology does not provide us with the information on material that been used for Hosa Technology Neutrik powerCON to Hosa NEMA 5-15P Cable (10') except that it has Black PVC Jacket and Oxygen-free Copper (OFC) Conductors.

Q: 4. Can this power strip be plugged into a regular outlet such as in a dorm room?

A: Yes, the A-Neutronics 24-Outlet / 48- Rackmount Power Strip can be used standalone.

Q: 5. Besides the other end, how many female 5-15 outlets are there?

A: There is two additional female outlet in the middle of the cable. The 50'and 30' versions have 5 in addition to the one at the end.

Q: 6. can i charge 12 x AA NiMH 2850 mAh simultaneously with this charger ?

A: Yes, you can charge up to 12 AA NiMH batteries simultaneously with the Ansmann ENERGY 16 PLUS charger.

Q: 7. Does this come with a grid?

A: No. The following unit does not come with a grid system. One has not been designed by the manufacture but the following system can be used. Till one is made YC Onion Energy Tube Pro Grid (21") BH #YCETPRO60GA • MFR #ETPRO60G_A https://bhpho.to/3z6xQLk

Q: 8. This charger provides 1000 mAh, per cell. Some cells, like the Panasonic Eneloop Pro, have a capacity well over 1000 mAh - like the 2550 mAh Panasonic Eneloop Pro. Can this charger(Or any charger with rated output less than the cells.), handle, recondition and fully recharge such cells with no issues?

A: I'm not an electrical engineer, but it is my understanding that the output of the charging unit merely determines how long it will take to fully charge a battery. The Panasonic would turn over AA batteries faster, four at a time. The Ansmann unit takes a bit longer, but handles 12 AA or AAA at a time, plus will handle C, D, 9V, AND has two USB ports for my phones, cameras, etc. Once charged, it maintains a trickle . Color coded LEDs let you know the status of charge, and even if you've got a bad battery. Have had for close to a year and I can't tell you how many batteries I've kept charged! By the way, buy the Watson batteries from B&H while you're at it.

Q: 9. Will it work in 220 volts?

A: This APC Basic Rack PDU Rackmount Power Strip is compatible with 120 volt North American power, and will not work for 220 volts regions.

Q: 10. Can this charge a 10,000mah D cell in one pass?

A: This will not charge a 10,000 mAh D battery. It would take more than 24 hours to charge.