The DR-1S-1 Fiber Transmission System (Receiver) from Meridian Technologies supports one 10-bit S-video signal on one fiber-optic cable. This model uses multimode fiber. It is well-suited for use in security & surveillance work, campus lecture networks, and pro audio-video work, among many other applications and settings.

The card is enhanced by SpectraSmart, an optional PC-based network diagnostic system. The DigiFlex product family is available as rack mount cards and modules that can be installed in any of Meridian's desk chassis or in 19" racking frames. This system can be configured in either star (module to rack) or trunking (rack to rack) configurations. This system can be transformed in to a standalone module by using the SR-1000/S chassis.

Receiver    Multimode Fiber    NTSC    One S-Video Signal    Hot-Swappable    Real-Time Transmission    Optional Management Software

The card supports one 10-bit S-video signal on a single fiber

This model is a laser-based system that uses multimode fiber

This model uses ST or FC fiber connectors

This system supports real-time video transmission

It offers 7MHz of bandwidth

The card supports NTSC

A wide optical dynamic range eliminates the need for optical attenuators

This solution is designed to be reliable and repeatable

It includes the SpectraSmart PC-based network-management tool

Local LED indicators provide visual cues for system status

System diagnostics are available for performance parameters

The card is hot-swappable

The laser features biased photo-detector circuitry for stable optical output over the full temperature range

It conforms with EIA RS-170 and RS-343A formats

Related Questions and Answers

Q: 1. will this work with the ifootage electric ray e1? I don't see a cable that would connect

A: No, the iFootage Electric Ray E1 USB Power Converter (Red) B&H # IFE1RED MFR # E1 RED works with the iFootage Dummy Battery Coupler and they do not make one for the LP-E17 Canon battery at this time.

Q: 2. can this be used with a dtap to male dc or only with canon's AC adapter?

A: It is best to only use the Canon DC Coupler DR-E17 with the Canon AC adapter only, https://bhpho.to/47Z1r9g.

Q: 3. whats the needed cord size for this coupler? I plan on hooking it to an external battery back around my waist. from what I've seen most couplers have a 2.1mm x 5.5mm plug. Thanks in advance!

A: This DC Coupler is designed specifically to work with the Canon AC Adapter CA-PS700, B&H #CACAPS700. It may not work with an external battery pack and is not recommended for use with one.

Q: 4. Will this also work with the AC Power Adapter AC-E6N? Specs here omit the N, which seems to be the adapter that ships with the equivalent product for the 5dmkiv battery. I'd like to purchase two couplers and one power sources.

A: Yes, you can use this with the AC-E6N.

Q: 5. Can I use it with Leica M Monochrom (the first one)?

A: According to the manufacturer, the Match Technical EP-10S Thumbs Up Grip for Leica M (Typ 240) and M (Typ 262) (Black), B&H # MATUEP10SB, would be the correct Thumbs Up Grip designed for use with the Leica M Monochrom Digital Camera.

Q: 6. I didn't know if I could use this cable with the GR-75 clip on battery? If so, what adapter would I need to use to make the connection? Thanks.

A: No, you cannot use this with any alternative battery. This is only for the T6i/T6s cameras.

Q: 7. Will this coupler connect directly into an external monitor to power the camera? I have a smallhd focus 7.

A: No, the connector on this coupler is too big. The SmallHD branded ones use a smaller male connector, like this one for an example. https://www.bhphotovideo.com/c/product/1337665-REG/smallhd_pwr_adp_cambatt_lpe6_monitor_camera_power_compatible.html

Q: 8. will this work with cannon rebel t6i?

A: Yes, you will also need the ac adapter, the ACE6N.

Q: 9. I need some help with my short term memory! I know I have seen a battery "dongle" for the SL2 battery (LP-E17) that has a "fake" battery to go in the battery compartment and on the other end of the dongle, maybe connected to a 6 inch cord, a receptacle for a real E17. This would allow changing a battery without actually handling the camera, having to readjust on the tripod, etc...I don't mean a dongle to attach to a separate power supply but just to another E17. I hope I have described this in enough detail. Thanks for your help?

A: You can attach the dummy battery and use it in conjunction with a brick battery. Click the links below to view the items; https://bhpho.to/3dZHDpI https://bhpho.to/2zy3Xrt

Q: 10. WIll this work with a EOS Rebel T7?

A: The Canon DC Coupler DR-E18 is not compatible with the Canon EOS Rebel T7. You need the Canon ACK-E10 AC Adapter and DC Coupler Kit. Here is the link: https://bhpho.to/3bF0o01