The Dalite 50 x 67" Cosmopolitan Electrol Front Projection Screen is a good, solid and reliable choice for school, business or even home use. This screen is a good choice when either your site, budget or demands do not require a permanently recessed installation. 

The built-in motor is quiet and offers reliable and smooth service. The tensioned version of this screen offers a guide cable that maintains even horizontal pressure to hold the surface flat while a custom slat bar with added weight maintains the vertical tension. Its handsome white case blends with any decor.

Dalite offers projection screens for all scenarios - business, education or social. Manual or electric, large or small, wall, ceiling or tripod style - Dalite has a style to suit everyone's needs.

The Silent Motor feature assures ultra quiet operation - a must for schools, libraries, hospitals and corporate boardrooms.

Wall or Ceiling Mount    Non-Tensioned    84" Diagonal    Video Format    4:3 Aspect Ratio    DA-Mat Finish    Front Projection    Silent Motor    220V, 50Hz

Handsome white textured case blends with any decor

Standard with a Decora style three position wall switch

UL Listed

Optional floating mounting bracket allows screen to be mounted onto a wall or ceiling studs and aligned left or right after installation by releasing two sets of screws

All fabrics are seamless

Related Questions and Answers

Q: 1. I wish to use this on my GH4/5 in combination with my Sigma 35mm 1.4 art and metabones speedbooster XL 0.64x canon mount. I've seen a video on youtube that shows this working with the correct step up/down rings but just wanted to check it would be ok.

A: While we do not know of this particular combination nor can we test it, we do know that SLR Magic says you can go as wide as a 35mm on the MFT sensor. Also step down rings from the larger lens to the smaller adapter seems not be a problem. The problem shows up when you use lenses wider than 35mm on MFT sensors like in the GH4/5. We see no issues saying no at this time.

Q: 2. The auto focus will work with the SLR Magic Anamorphot-50 1.33x Anamorphic Adapter?

A: Sorry, we do not find any mention of AF capability with these devices. We only find that focus is manual while using these.

Q: 3. Will this work with the Rokinon 50mm T1.5 lens ?

A: The anamorphic adapter will work best with lenses that offer a threading of 62mm or less and a front element diameter of 50mm or less. You can work with a larger threading but it is not optimal. The Rokinon 50mm T1.5 lens offers a 77mm with a lens element diameter not that far off. A lot of these taking lenses have to be experimented with what work best.

Q: 4. Hi, does it still require the diopter for close up shots? If so, will the SLR Magic rangefinder remove the need of the diopter?

A: No, sorry anamorphic does not work that way. If you needed diopters before, you will still need them while using the anamorphic adapter.

Q: 5. will this work with the sayang cine lenses?

A: this adaptor will work fro any lens with a front thread under 62mm. because this adaptor has a rear thread of 62 it will not fit onto any lens with say a 77mm thread. its ok to go lower, say if the sayang lens has a 50mm front thread you can easily buy a step down ring to match them up.

Q: 6. Will it work with the Olympus M.Zuiko Digital ED 12-40mm f/2.8 PRO Lens?

A: While the filter threading will be compatible, zoom lenses like this are not good options for this lens. The wider focal ranges will not work with the lens. We do not recommend this adapter with that lens. A better choice would be to get one of SLR Magic's Cine Lenses, such as the 35mm T1.4 Mark II Lens for MFT, B&H # SL3514LMFT. https://bhpho.to/2bYmRJZ

Q: 7. I would like to use this adapter with my Zeiss prime lenses, on a D810, with my 85mm and 100mm lenses. What is the best kind of step-down ring to use, since the thread sizes on my lenses are all larger than the recommended 58mm?

A: here's what can tell you...if the filter threads on your lens are larger than 62mm on a full frame sensor, it will vignette. i have a very special manual zoom lens that is so sharp, i don't really understand it. the threads are 72mm, and it vignettes so badly that in order to correct it the horizontal crop is almost 4:3. on super35, it's still no good. it is what it is. i really like this adapter. i have two (with the range finder-it's a must have). hope this helps.from their website, they suggest full frame sensors with 40-85mm lenses. in fact, for any sensor size, they recommend a max of 85mm. for fun, i put one on my old Canon XA10 and zoomed it to 200mm. it looked fine. i know it's a big purchase for most, so make sure you have lens specs that they suggest.

Q: 8. I have a Sigma 18-35mm Art lens with a 72mm front thread lens. Is there a way I can use this with this since it is made for 62mm lens'?

A: You can attach the Anamorphot-50 to a lens with a 72mm thread by using a 72-62mm Step-Down Ring. Sensei makes such an adapter, it is B&H #SESDR7262.

Q: 9. Will this work with tamron 28-75 2.8 sony?

A: This product will not work with the Tamron 28-75mm. The diameter of the lens itself is too large to work with the Anamorphot-50, along with the other issues of the focal range and filter thread. The Anamorphot-50, and adapters like this in general, are designed to work with smaller, fixed focal length lenses. The SLR Magic Cine II 50mm f/1.1 Lens (Sony E-Mount), B&H # SL5011FE2, is the best option to work with the Anamorphot-50. https://bhpho.to/2CXd0lW

Q: 10. Will this work on a Sony 50mm 1.4?

A: We're afraid not. The Sony lens you are referring to has both a filter thread and outer diameter that is too large.