The Dalite 50 x 67" Cosmopolitan Electrol Motorized Projection Projection Screen is a rugged and reliable screen for office and educational use. This screen is a viable option when your venue does not permit or require a recessed screen.   The switch permits the screen to be stopped at pre-set limits but is adjustable.

Wall and Ceiling Mounted    Non-Tensioned    84" Diagonal    Video Format    4:3 Aspect Ratio    Front Projection    Matte White Finish    120V, 60Hz    With Low Voltage Controller

Ideal for applications where a recessed installation is not desired or feasible

Patented in-the-roller motor mounting system for quiet operation

Standard white powder-coated finish

Matte White fabric up to 10' high will be seamless; Glass Beaded fabric up to 8' will be seamless; Video Spectra 1.5 and High Contrast Matte White fabric available in sizes up to 8' high; High Power fabric is available in sizes up to 9 x 12' and will be seamless in sizes up to 6' high

Optional floating mounting bracket allows screen to be mounted onto a wall or ceiling studs and aligned left or right after installation by releasing two sets of screws

UL listed

Related Questions and Answers

Q: 1. What aspect ratio gives on super 35mm sensors? it's still 2.35:1?

A: Super35 sensors shooting in HD use a 16x9 (1.78:1) frame. This adapter, with it's 1.33x compression, will squeeze an image into that HD frame. Then in your NLE, you de-squeeze the image into 2.35:1.

Q: 2. Will this work with the Voigtlander 25mm f/0.95?

A: This works best with high f stops minimum f 4 it doesnt work with fast lenses

Q: 3. I'm having a hard time removing the step-up ring, how do I unscrew it?

A: Get a pair of thick rubber gloves for the kitchen. It will give you the grip you need. I have had no issues with mine, but did it to a friend's lens that the ring was stuck and it came off fine.

Q: 4. Will this adapter work for the Olympus M.Zuiko 12-40mm f2.8 PRO lens? At least at the 35-40mm range end?

A: The SLR Magic Anamorphot-50 2.0x Anamorphic Adapter should work. It attaches to 62mm filter rings. The OM SYSTEM M.Zuiko Digital ED 12-40mm f/2.8 PRO II Lens has 62mm front filter threads for the SLR Magic adapter to attach to.

Q: 5. Would this lens work on a Canon EOS M with the EF-M 18-55mm f3.5-5.6 IS STM lens that comes with it? Is there a adapter?

A: The Canon EF-M 18-55mm f3.5-5.6 has a 52mm filter thread connection. Using the step-up ring below would allow you to mount and work with the SLR Magic Anamorphot-50 2.0x Anamorphic Adapter. Sensei PRO 52-62mm Aluminum Step-Up Ring BH #SESURPA5262

Q: 6. I just learned of the existence of anamorphic lenses and suddenly am obsessed with having one of my own. Im wondering if this will work with my Sigma 50mm 1.4 art lens, which has a large front element.

A: The Sigma Art 50mm F/1.4 has a 77mm filter thread. The Anamorphot-50 is designed to work with lenses of a certain focal length that have 49, 52, 58 or 62mm Filter Threads. It may work with bigger lenses, but it is not recommended as it may not perform properly. This guide on our website goes over the focal lengths that will work, which depends on the Sensor Size of the camera as well.https://bit.ly/2Hpvcq1

Q: 7. Do I need to use any diopters with this adapter or does the lens maintain its original focussing range?

A: We are not aware of any diopters that you would use or even need to use with this product. However adding the Range Finder will simplify the process of focusing with this anamorphic adapter. You may want to get the kit with the Range Finder included, which is B&H # SLRA50133X77.https://bhpho.to/2I4etoZ

Q: 8. I would like to use this adapter with my Zeiss prime lenses, on a D810, with my 85mm and 100mm lenses. What is the best kind of step-down ring to use, since the thread sizes on my lenses are all larger than the recommended 58mm?

A: here's what can tell you...if the filter threads on your lens are larger than 62mm on a full frame sensor, it will vignette. i have a very special manual zoom lens that is so sharp, i don't really understand it. the threads are 72mm, and it vignettes so badly that in order to correct it the horizontal crop is almost 4:3. on super35, it's still no good. it is what it is. i really like this adapter. i have two (with the range finder-it's a must have). hope this helps.from their website, they suggest full frame sensors with 40-85mm lenses. in fact, for any sensor size, they recommend a max of 85mm. for fun, i put one on my old Canon XA10 and zoomed it to 200mm. it looked fine. i know it's a big purchase for most, so make sure you have lens specs that they suggest.

Q: 9. Hi there! Would you attach a filter like f.e. a Tiffen black pro mist or an ND-filter in front or in between the taking lens and the Anamorphot? Any idea?Thanks to all of you in advance! =M

A: We would think that there would be no problem with either mounting the filter on the front or the rear of the Anamorphot. Of course, experience is the best teacher and hopefully someone can chime in on that.

Q: 10. Will this work with: Sigma 45mm f/2.8 DG DN Contemporary Lens for Leica L

A: This will depend on the camera you are using in this equation. That camera must have a 4:3 anamorphic mode as this is a 2.0x adapter. Also it will need to be in the APS-C format as this adapter supports focal lengths between 35 and 100mm for APS-C and MFT format sensors. For a full frame sensor it supports 70 to 100mm for full-frame format sensors and the Sigma 45mm would be too wide. If you are within the proper parameters for the camera being used you would then need a 55-62mm adapter, BH #SESURPA5562.