The Acebil P-22GX Professional Tripod System includes the T752 Aluminum Tripod, H20 Fluid Head, GS-3 Ground Spreader, and the S-52 Carry Case. Capable of supporting up to 13.2 lb (6kg), the P-22GX provides a professional tripod system solution.

The T752 can be adjusted to provide a height ranging from 17.7-60.2". Enhanced tripod stability is provided via the GS-3 Ground Spreader that holds the legs in position. You can achieve fixed counter balance, pan, and tilt drag by means of the included H20 fluid head. A convenient 75mm standard leveling base is also provided allowing tilt angles of +90° / -80°. Camera mounting is provided via a side plate. You can use the S-52 Soft Carry Case for storing the P-22GX tripod system.

Supports 13.2 lb (6kg)    T752 Aluminum Tripod    H20 Fluid Head    GS-3 Ground Spreader    S-52 Carry Case    Fixed Counter Balance    Pan & Tilt Drag    Camera Side Plate    Tilt Angle - +90° / -80°

Supports up to 13.2 lb (6kg)

Includes T752 Aluminum Tripod that can be adjusted to provide a height ranging from 17.7-60.2"

Includes H20 Fluid Head that allows you to achieve fixed counter balance, pan, and tilt drag

H20 Fluid Head integrates a convenient 75mm standard leveling base

Allows tilt angles of +90° / -80°

Includes GS-3 Ground Spreader that holds the tripod legs in position to enhance tripod stability

Includes S-52 Carry Case for storing the tripod system

Related Questions and Answers

Q: 1. Will it accept standard Arca Swiss type/sized plates?

A: No it does not.

Q: 2. Will a Manfrotto style plate fit?

A: GVM does not indicate the plate style of the GVM JJL-JY. We recommend using this QR adapter with tripods that do not have a Manfrotto plate style. The Axler quick release would convert the plate style when attached to the GVM plate. Axler QRA-501S Quick Release Assembly BH #AXQRA501S https://bhpho.to/3TFbUyv

Q: 3. Will it work with my Fujinon XT17x4?

A: No, This Acebil RMC-8PRO Video Lens Zoom Controller for ENG Cameras will not support the XT1 or XT4.

Q: 4. Is there an extension cable available for using it on a camera jib?

A: I just cut the cable and fitted a long peace in the middle. A good unit that works well.Andrew Nivison

Q: 5. Does the tripod have adjustable pan and tilt drag or is it fixed? The specs and overview are conflicting.

A: A side mounted knob adjusts the tension of the drag on front-rear, tilt movements. Rotate to adjust with a camera mounted to find the most appropriate setting. A pan Drag/Lock Lever provides both drag and locking control of horizontal head movement. This information can be found on the user manual in the overview section of this tripod: https://www.bhphotovideo.com/lit_files/614211.pdf

Q: 6. Will this work with the DVX100B?

A: I'm 99% sure it will, notice you will need to connect the the cable on the side of the hand piece (not on the top).

Q: 7. Does the video tripod system carrying case have a shoulder strap?

A: In most instances, tripod carrying bags do have shoulder straps, but this being a new item (as of this writing not yet available to us), we cannot confirm this by checking the product physically.

Q: 8. How much does it weigh?

A: The GVM JJL-JY Video Tripod System with Fluid Head weighs 8.38 lb / 3.8 kg.

Q: 9. I just purchased the MVH502A. A review shows you can screw the 3/8-16 screw into the side. Of course I use that one. Any place to screw the 1/4-20 screw? Both sides only seem to fit the 3/8-16.

A: If you wanted to connect a product with a 1/4 to one of the 3/8 threadings on the side of this tripod you could look in to a reducer bushing. B&H number OB1039 is the Oben 3/8 -16 to 1/4 -20 Reducer Bushing and is a good choice for this function.

Q: 10. How tall is the tripod without the head?

A: Unfortunately this is not info listed by GVM as they do not sell the head separately. With the head the maximum height is 74.4 inches. We believe it will be around 67-69 inches without the head.