The Sescom LN2MIC-TASDR100 Line Out to Camera Mic Level In Cable is designed specifically to connect the line output of the Tascam DR-100 audio recorder, to the microphone input of compatible DSLR cameras (see compatibility chart below). The cable measures 9" in length, features 2 TRS 1/8" (3.5mm) mini connectors and a -35dB level attenuation pad for "stepping down" line level audio, to microphone level. The cable is magnetically shielded which eliminates RFI (Radio Frequency Interference) noise from cell phones, PDA's, WIFI, etc.

For the Tascam DR-100    Connects Line Outputs to Mic Inputs    1/8" (3.5mm) Mini Connections    -35dB Pad at Mic Connection    Shielded to Reduce RFI Noise    Measures 9" (229mm) Long

Canon EOS 5D MKII

Canon EOS 7D

Canon Rebel T2i/ EOS 550D

Canon EOS 60D

Canon Rebel T3i/600D

Nikon D7000

Nikon D300s

Related Questions and Answers

Q: 1. Does it have a waveform?

A: No, the AndyCine A6 does not have waveform.

Q: 2. Will this fit on a BMPCC 6k right of the box or will I need something else to attach it to my camera?

A: You will need a cold shoe adapter since the BMPCC 4K/6K has a 1/4"-20 thread at the top. https://www.bhphotovideo.com/c/search?q=cold%20shoe%20adapter&filters=fct_bottom-mounting_3264%3A1-4in-20-male

Q: 3. How useful as a substitute for a flippy screen in the field to focus and review image when the camera in in awkward position?

A: The ANDYCINE A6 5.7" Full HD HDMI On-Camera Monitor would be a perfect solution for off camera monitoring.

Q: 4. Can you hear the playback from the monitor without the use of earphones?

A: No. It does not have built-in speakers.

Q: 5. What is the monitor brightness

A: Andycine does not publish a screen brightness spec for this monitor. As a general rule of thumb when no spec is published you can expect it to be a standard brightness of 350-400 nits.

Q: 6. Will this work for my lumix gh4

A: Yes, the ANDYCINE A6 Monitor will work with the Lumix GH4. You will need an micro-HDMi to HDMI cable.

Q: 7. Does it have an On/Off switch ?

A: Yes, the ANDYCINE A6 5.7" Full HD HDMI On-Camera Monitor with 4K Support/DC Out/Tilt Arm has an On/Off button on the top of the monitor.

Q: 8. Will this monitor support older DSLRs like the Canon Rebel SL2 200D?

A: The ANDYCINE A6 5.7" Full HD HDMI On-Camera Monitor with 4K Support/DC Out/Tilt Arm will work with the Canon SL2.. The monitor comes with the correct HDMI cable for the SL2.

Q: 9. Does this Monitor allow a clean feed out?

A: This monitor has a loop out. It will pass along whatever video signal is coming in. If the HDMI feed coming in is clean then the output will be clean. If the HDMI feed coming in is not clean then the monitor is not capable of removing any on screen overlays added by your camera.

Q: 10. i am new to external monitors. am i able to start and stop video recording from the monitor ? i will be using it on a R6ii ?

A: No, the ANDYCINE A6 5.7" Full HD HDMI On-Camera Monitor with 4K Support/DC Out/Tilt Arm offers no camera controls at all.