Iogear Kvm Switch 1 Keyboard 2 Computers

Aten 19" 16-port Lcd Usb Kvm Switch

Product Code: ga25747
Availability: In Stock

$5,117.85 $6,857.92

Qty

0 reviews Write a review

Description
Reviews (0)

The 19" 16-Port LCD USB KVM Switch from Aten features an integrated 19" LED-backlit LCD panel allowing access and control with up to 16 computers from a single console (keyboard, mouse, and monitor). As many as 16 additional switches can be cascaded bringing the total number of connected computers to 256 computers that can be controlled from a single keyboard-monitor-mouse console.

The switch supports both USB and PS/2 connections for the computers. The CL1316 intercepts keyboard input directly, thus eliminating the need for any software configuration. Switching between computers can be easily accomplished either by manually pressing the front panel push button port LEDs, entering hotkey combinations from the keyboard, or via a menu driven multilingual on-screen display (OSD) system. LCD KVM switch offers a space-saving, streamlined approach to KVM switching technology by integrating an LCD panel, full keyboard, and touchpad into a 1U rack-mountable sliding housing.

Rack Mountable LED Illumination Light Dual Interface Auto PS/2 & USB Interface Detection Two Level Password Security Auto Scan Feature Hot-Pluggable & Broadcast Mode Buzzer On/Off via Hotkey and OSD Supports USB Keyboard for PC, Mac, & Sun Multiplatform Support

Parameters
Computer Connections	Direct: 16 Maximum: 256 (via Cascade)
Port Selection	OSD, Hotkeys, Push buttons
Connectors	KVM Ports: 16 x SPHD-17 Female (Yellow) FW Upgrade: 1 x RJ-11 Female (Black) Power: 1 x 3-prong AC Socket (IEC60320/C14)
Switches	Reset: 1 x Semi-recessed Pushbutton Power: 1 x Rocker FW Upgrade: 1 x Slide LCD Control: 4 x Pushbutton LCD On/Off: 1 x Pushbutton Port: 16 x Pushbutton
LEDs	Online: 16 (orange) Selected: 16 (green) Power KVM: 1 (dark green) Power LCD: 1 (orange) Lock Num: 1 (green) Lock Caps: 1 (green) Lock Scroll: 1 (green)
Emulation	Keyboard/Mouse: PS/2, USB
Video Resolution	1280 × 1024 at 75 Hz, (DDC2B)
Scan Interval	1 to 255 seconds
Power	100 to 240 VAC, 50/60 Hz, 1 A
Power Consumption	230 V, 22.9 W
Environment	Operating Temperature: 32 to 122°C (0 to 50˚C) Storage Temperature: -4 to 140°F (-20 to 60˚C) Humidity: 0 to 80% RH, (non-condensing)
Housing	Metal + Plastic
Dimensions	19 x 27.1 x 1.7" (48.3 x 68.9 x 4.4 cm)
Weight	28.2 lb (12.77 kg)
Packaging Info
Package Weight	40.25 lb
Box Dimensions (LxWxH)	33.75 x 26.75 x 5.35"

LED illumination light illuminates the keyboard and touchpad to allow visibility in low-light conditions

A single console controls up to 256 computers by cascading to two levels and connect up to 16 switches.

Integrated KVM console with 19" LED-backlit LCD panel

Dual interface supports computers with PS/2 or USB keyboards and mice

Multi-platform supports Windows 2000/XP/Vista, Linux, Mac, and Sun

Supports USB keyboards for PC, Mac, and Sun

Auto PS/2 and USB interface detection

USB or PS/2 keyboard and mouse emulation computers boot even when the console focus is elsewhere

Video quality up to 1280 x 1024 at 75 Hz, (DDC2B)

Convenient computer switching via front panel push buttons, hotkeys, or multi-lingual On-Screen Display (OSD) menu

Two-level password security-only authorized user's view and control computers. Up to four users and an administrator with a separate profile for each

Auto Scan feature for monitoring user-selected computers

Broadcast mode operations simultaneously performed on all selected computers

Hot-pluggable add or remove computers without having to power down the switch

Buzzer on/off via hotkey and OSD

Related Questions and Answers

Q: 1. Are the auxiliary cables necessary for the input devices sound? It should accept sound from inputs through HDMI, right?

A: Yes, the IOGEAR 2-Port 4K Dual View HDMI KVMP Switch with USB Hub and Audio can accept audio via HDMI.

Q: 2. when a pc is connected through this switch, during boot are the motherboard bios screens, shown in the monitor? that is the post report, or the boor menu if called for , the bios itself if called for.............I just returned a Tripp Lite 4 port display port switch that would not display any video until the windows welcome screen which is when the windows video drivers take over...... A switch that will not display the motherboard bios...has no value...Tech support had no comment...these PC worked perfectly with a StarTach switch...so no issue with the PCs

A: Yes, this switch should do the trick. I use this switch for my work laptop, which uses disk encryption and won't boot windows until a password is entered. I also have my desktop machine connected to the switch and see the BIOS splash screen and on occasion I've interrupted the boot process via keyboard (connected to the switch) to modify the BIOS setting. I hope this info helps.

Q: 3. Can I hookup one PC and one MAC STUDIO to this KVM switch?

A: Yes, you can use the IOGEAR 2-Port 4K Dual View HDMI KVMP Switch with USB Hub and Audio (TAA) with a Windows PC and a Mac Studio.

Q: 4. Does this product support EDID so both connected computers see a video device, or does switching between computers cause the disconnected one to lose the video signal?

A: Your IOGEAR Access Pro 2-Port USB Type-C KVM Switch with Power Adapter Kit allows you to switch between the two devices one at a time. You cannot have two computers showing at the same time.

Q: 5. When switching computers does the signal stay active? (in other words - does window arrangement stay the same or change when switching?)

A: Yes, the ATEN CS1964 4-Port 4K Triple Display KVMP Switch will keep the signal active so that there is no window reformatting when switching between computers.

Q: 6. Would I be able to use this KVM switch to have audio playing out my studio monitors? I use the scarlett 2i2 interface to connect to a pc via USB. Would it be possible to connect both PC towers to the KVM switch and use the same Scarlett USB audio interface to switch playback for the studio (audio) monitors from each pc tower?

A: While the Focusrite Scarlett 2i2 2x2 USB Audio Interface could be connected to multiple PCs using the IOGEAR 2-Port 4K Dual View DisplayPort KVMP Switch with USB 3.0 Hub and Audio, it would not be able to serve as an audio source for two separate software programs running on two PCs at the same time. It could be used with software on one PC and then, if that software is closed or the Scarlett is disconnected from it, could be used again with another software on a separate PC.

Q: 7. Thumderbolt to USB 2.0 hub on my MacBook since I use most of the other ports for power and external monitors. I need a KVM switch for KB/mouse because Universal Control stopped working for me. Will this device work if plugged into the USB 2.0 hub with a thunderbolt to USB 2.0 cable?

A: The ATEN US3310 is not designed for use with Thunderbolt ports or Thunderbolt devices, and may not work as intended in this scenario. It may be possible if connected to Thunderbolt generation 3 or higher, but the switch is designed specifically for USB 3.0/USB 3.1 and is not intended for use with a USB 2.0 host connection.

Q: 8. I'd be using this KVM switch in a studio environment, does this BH #IOGCS1942 unit have fans/produce noise? If it does, is it comparable to noise produced by PC fans or louder?

A: This unit does not have any fan vents.

Q: 9. Is HDR10 going to work running through this KVM?

A: There is no indication from Aten's own documentation (website, datasheet, and user manual) that HDR10 is supported.

Q: 10. Will this KVM switch work with a 5K monitor?

A: While you are able to connect a 5K monitor to the IOGEAR 2-Port 4K Dual View DisplayPort KVMP Switch with USB 3.0 Hub and Audio, the resolution will only be able to hit up to 4K.

There are no reviews for this product.