The Countryman E6 Flex Omnidirectional Microphone combines the springy, form-fitting ear grips of the E6, with the flexible and durable boom of the E6i earset microphone. The E6 Flex provides virtually invisible operation in stage performances, trade shows, houses-of-worship, auctions, lectures and much more.

The omnidirectional pattern is the most versatile and features a wide pick up area while minimizing extraneous noise. Flexible microphone positioning is maintained and the included windscreen minimizes wind noise.

A wide variety of colors and connections are available for use with various wireless transmitters. This version is black and the cable terminates to a Switchcraft TA5F connector for Lectrosonics wireless transmitters.

Switchcraft TA5F for Lectrosonics    Slim Springy Ear Grips of E6    Flexible Boom of E6i    2mm Diameter Duramax Cable    Headroom for General Speaking    Black

A miniature cardioid capsule is mounted to a low-profile, flexible frame. This lightweight, unobtrusive design is available in various colors that virtually render the entire microphone invisible against the skin.

The included removable, quick-swap cable detaches from the actual headset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy, as they are available in a wide selection of connections to accommodate various wireless transmitters. The Duramax 2mm diameter cable provides extra strength, flexibility and durability.

The omnidirectional polar pattern is the most versatile pattern for accurately capturing any source. A generous pick up area is forgiving during imperfect microphone placement. The pattern also minimizes extraneous noise. The flexible boom provides a stiff fit that maintains its shape for single user applications. The E6 Flex is also available in a cardioid version for maximum off-axis noise rejection in environments with high feedback and noise.

This E6 Flex's sensitivity response is optimized to accurately capture general speech without noise and distortion.

The fit of the classic E6 meets the flexibility of the E6i. The front boom is like an E6i, the ear section is like the classic E6, the result is the best fitting easiest to use earset available.

Countryman Earsets are the smallest, lightest, and least visible head-worn microphones. The E6 Flex comes in four skin tones to disappear against the face.

Changeable protective caps let you switch between cardioid and hypercardioid patterns in seconds.

Frequency response is better than 30Hz to 15kHz with smooth off-axis response and >100dB dynamic range. Countryman Earsets sound like world-class, full size performance mics but the performer has complete freedom.

The E6i is exceptionally resistant to makeup, sweat and moisture when used with the supplied protective caps. The skin-colored, almost unbreakable boom resists water, sweat, and makeup and can be bent and re-bent many times to fit different performers. The front boom of the E6 Flex is slightly firmer than our E6i, so it's easily shaped right on the performer's face and smoothes out for a professional look.

The E6 Flex comes in three sensitivities for different speaking or singing styles, with up to 140 dB SPL capability.

With other microphones a worn cable requires purchasing a completely new mic. An E6 replacement cable easily replaces it in less than a minute. Quick-connect miniature 1 mm or 2 mm super-rugged cables are available in four colors for almost any wireless transmitter or phantom mic input providing 3 - 48V.

Related Questions and Answers

Q: 1. The compatibility list does not include Canon EOS 7D Mark II. Is this camera specifically unsupported for some reason?

A: You are correct, the compatibly chart released by the Manufacturer does not list the 7D Mark II. We are not aware of the exact reason why it is not listed, however we have to assume that it is not compatible with the electronic controls this gimbal offers. You would still be able to balance and shoot with a 7D Mark II on this gimbal, as it supports many cameras of the same size, it is just that electronic control is not listed as supported.

Q: 2. Can the AirCross 2 break down into separate smaller parts for travel like the Ronin SC?

A: This gimbal is not broken down in the same way as the Ronin-SC. It is for the most part one larger piece.

Q: 3. Will the Nikon 800mm PF fit in the bag with the lens hood revered and stored on the camera. I have a concern the + model with the laptop sleeve will decrease the depth to prohibit the storage of the lens. Thanks!

A: No, you will not be able to fit the 800mm PF, as the lens is too large for the Gura Gear Kiboko 2.0 Backpack (Black, 30L).

Q: 4. Will this fit my Canon 700D? I know weight wise it's fine, but I'm more concerned about the width. Thanks!

A: The width of your Canon D700 will not be a problem. As long as your camera-lens combination is balanced on every axis following the instructions your good to go.

Q: 5. Will it accommodate Nikon Z9 attached with NIKKOR Z 400MM F/2.8 TC VR S?

A: The Gura Gear Kiboko 2.0 Backpack (Black, 30L) is too small to fit the Nikon Z9 with the 400mm lens attached.

Q: 6. Can it holt black magic pocket camera 4k?

A: Yes it can. According to the Manufacturer the Moza AirCross 2 will be able to handle the Pocket Cinema Camera 4K/6K. The load capacity is 7 pounds, you will just need to use a lens which stays within that capacity.

Q: 7. Does the Slypod come with Quick release plate, Pan - Tilt Head and the Wooden Handle ?

A: That's correct, the Moza AirCross 2 Gimbal Professional Kit & Moza Slypod comes with the quick release plate, pan/tilt head and the wooden handle included.

Q: 8. Does this work with the slypod?

A: Yes, you can use this with the Slypod. We even offer a kit with both, BH #MOACGN03SLYK. https://bhpho.to/3o5Pesr

Q: 9. can it be used for precision motion controlled movements? like a Geni or other, to create gigapixel style images ?

A: The Moza AirCross 2 3-Axis Handheld Gimbal Stabilizer Professional Kit (B&H# MOACGN03) is designed to stabilize a camera in response to readings taken by solid state and precisely calibrated accelerometers. It will not be possible to move a camera with the same level of precision when its small nub-like joystick is manually pushed by a person. Especially punctilious gigapixel-style shooters would want to mount the camera and lens so as to center it at the no parallax point (A.K.A. nodal point) of the lens. That would involve positioning it so far backward that it may not balance on the gimbal without significant additional counterweights added in front of the camera. Having said that, if you will use a short lens and overlap your images by a significant amount (and if you do not mind that the tilt will by necessity have to move the camera in an arc) then you may indeed find that you are able to take multiple shots and combine them to make a composite photograph at an especially high resolution. The further the subjects are from the camera, the better that will work.

Q: 10. Does it support s1h with zeiss 15mm cp3?

A: The Zeiss CP3 lens would be more difficult to balance with the Panasonic S1H on the Moza Air Cross 2 as it would make it a very front-heavy setup, but it is within the Moza Air 2's 9.5lb capacity.