Make sure you can get a light just where you need it with the compact and wireless SB-R200 Remote Speedlight from Nikon. Functioning as a wireless i-TTL slave flash for Nikon's Creative Lighting System, the SB-R200 is a unique speedlight that lends itself well to close-up photography. It features a guide number of 33' at ISO 100 and has a wide flash distribution, allowing it to cover lenses as wide as 24mm. The head can also tilt downwards 60° and upwards 45° for controlling where light will fall on your subject. Users can make use of a built-in white LED for AF assist in dim lighting along with support for high-speed sync modes. Additionally, it runs on a single CR123A lithium battery and can recycle in approximately 6 seconds at full power.

The SB-R200 has a specialized shoe that can fit into the included AS-20 Speedlight Stand or the optional SX-1 Attachment Ring for mounting directly to a lens. It also comes with a filter holder and color filter set for color correction or specialized lighting effects.

Wireless Slave TTL Flash for Close-Ups    Compatible with Nikon i-TTL    Guide Number: 33' at ISO 100    Coverage: 24mm (FX Format)    Tilts from -60° to 45°    Recycle Time: 6 Seconds    AF Assist Light; High-Speed Sync    Runs on One CR123A Lithium Battery    Filter Holder and Filter Set Included    Optional Ring for Mounting to Lens

Designed to be used off-camera as a wireless slave flash, the SB-R200 is a compact speedlight that can be triggered by the SU-800 Wireless Speedlight Commander, CLS-compatible speedlights with commander modes, and the built-in flash of many Nikon DSLRs with iTTL support.

The SB-R200 is optimized for close-up photography due to its compact design and unique ability to be mounted directly to a lens via an optional adapter or placed around the subject with the included AS-20 Speedlight Stand. Also, its size and wireless capabilities make it a good option for general photography as well.

Supports i-TTL, D-TTL, TTL (film-based cameras), and manual control.

Offers a guide number of 33' at ISO 100 and 46' at ISO 200.

Provides coverage for 24mm lenses with a beam angle of 60° vertically and 78° horizontally.

The flash head can tilt downward 60° and tilt upwards 45° with click stops every 15°.

AF assist light with white LED for working in dim light.

Physical controls and a flash-ready light are present on the top of the unit.

The SB-R200's wireless modes offers three groups and four channels.

Manual control from 1/1 to 1/128 power.

Has support for high-speed sync.

The recycle time at full power is approximately 6 seconds.

Flash duration of 3/5000 second.

Runs on one CR123A lithium battery which provides enough power for approximately 290 flashes.

Related Questions and Answers

Q: 1. I cannot get the transmitter and receiver to communicate at all. Both of them light up but they don't work together. I've tried all sorts of different dpi codes and none seem to work. I'm trying to use it with a Nikon d810. Any help?? I'm pretty frustrated!

A: Did you try to take the batteries out for both pieces, put the batteries back in, and press the power button?I only had a problem once, and did this and it worked fine. I have not have any problems with it otherwise.

Q: 2. Does this work with a nikon D750 ?

A: ALL THE VELLO ITEMS I HAVE , WORK GREAT WITH BOTH MY NIKON AND CANON EQUIPMENT IT SHOULD WORK FOR YOU!! YOU COULD ALWAYS CALL NIKON OR BH CUSTOMER SERVICE AND ASK?? BOTH WILL GIVE YOU STRAIGHT ANSWERS!!---ENJOY THAT NIKON 750.......JIM D SMITH

Q: 3. Can I order a replacement cable that connects the receiver to the camera?

A: Yes you can. Please email askbh@a href= http://bhphoto.com target= _blank bhphoto.com/a and make sure to indicate what specific camera you need the cable for and they will reply with the proper option.

Q: 4. Does this work with D3 ?My camera does not have the barrel plug receptacle that would accept the cable that is shown in the photo.

A: Yes, this remote (the Nikon 10-pin version) works just fine with your D3. Your 10-pin connector is behind a cover on the front of your camera; see page 4 of your user manual (or search for the PDF online) to see exactly where it's located.

Q: 5. Does it work with Lumix GX 9 camera?

A: The Vello FreeWave Plus II Wireless Remote Shutter Release for Select Panasonic Cameras is not compatible with the Panasonic Lumix GX9 Mirrorless Camera. This camera does not have a remote port. You would need to attach the receiver included with the Vello FreeWave Plus II Wireless Remote Shutter Release to the cameras remote port with the included cable. The camera has built in Wi-Fi and Bluetooth. Using a smart phone with the Panasonic Image App is the only remote control option.

Q: 6. Will this work with the Sony RX10M4?

A: Yes, this remote can work with the Sony RX10 IV using the Multi-Terminal port.

Q: 7. I have a Vello FreeWave and I find the status led that shows a shutter release when in remote mode is very small and dim and cannot be seen when there is much ambient light. It seems to me the status led on the plus model is much larger. Can anyone comment if the status led of the plus model is bright and easy to see ?

A: Yes, the LED on the receiver for the FreeWave Plus is a much larger light than the one on the FreeWave. The light on the transmitter is a bit larger and easier to see.

Q: 8. Will this work with S110?

A: Unfortunately, the FreeWave Plus Wireless Remote Shutter Release for Canon is not compatible with the S110.

Q: 9. This looks great but I suspect it does not allow for a speedlite to be attached. Correct?

A: no, no direct or dual control for speedlite

Q: 10. d3200 & d7500; will Vello FreeWave Plus work?

A: Yes, the Vello FreeWave Plus is compatible with those cameras.