The Rolls MX42 is an audio mixer with four pairs of RCA, stereo inputs and one pair of stereo RCA outputs. The mixer is capable of mixing signals from CD players, instruments, portable recording devices, video playback devices and more, outputting the result in a single stereo source. Passive circuitry allows the MX42 to operate without the need for battery or external power. Level control dials for each channel are located on the front. These dials boast a potentiometer resistance of 100 kOhms.

8 x RCA Inputs in Stereo Pairs    2 x RCA Outputs (Stereo)    Mixes Multiple Devices with RCA Outputs    Individual Level Knobs for Each RCA Pair    Knobs Sport 100-kOhm Potentiometers    Passive Circuitry - No Power Requirement

Related Questions and Answers

Q: 1. Is this card capable of realtime downconversion from 4K to HD 1080 for monitoring/Color grading purposes ?

A: Yes, I'm able to output a 1080p signal from a 4K timeline. However, I do not believe the card itself does the conversion, but rather your color software.

Q: 2. How long will these battery last on an r5c?

A: The run time of the Canon EOS R5 C Mirrorless Cinema Camera on the SmallRig VB99 Pro Mini V-Mount Battery will depend on your settings, usage, and the accessories attached. Generally, one would expect the battery to last about 2.5-3.5 hours under normal conditions. High quality resolutions and frame rates will reduce run times.

Q: 3. Does the maximum payload include the weight of the counterweights, or just the camera and head? Could the jib conceivably carry ~80lbs of combined payload of 30lbs of camera and head, along with the 50lbs (guess) of counterweight?

A: The max payload would be 44 lb for the Konova SUNJIB. This would not include counterweights. However, The optional tripod that carries the Jib and counterweights would need to be able to hold the total weight.

Q: 4. Can I use both ports at the same time?

A: The Blackmagic Design DeckLink Mini Monitor 4K offers simultaneous HDMI and SDI output.

Q: 5. Can the HDMI and SDI be different video feeds?

A: No, the Blackmagic Design DeckLink Mini Monitor HD outputs one signal at a time.

Q: 6. There are two pieces in the box; the bottom bracket and the top?

A: That is correct, this will come with 2 brackets with one being for the pan axis and the other for the tilt. You will need to use these brackets with a pair of Syrp Genie Mini Panning Motion Control Systems, B&H # SY320001. https://bhpho.to/2S9GyVs

Q: 7. With the SmallRig VB99 Pro Mini V-Mount battery, can the canon eos r5c be powered without a dummy battery?

A: The USB-C PD port on the SmallRig VB99 Pro Mini V-Mount Battery can be used to power the Canon EOS R5C without a dummy battery.

Q: 8. Hello, what’s the low temperature protection limit ?

A: SmallRig has not tested the operational low temperature limits of the SmallRig VB99 Pro Mini V-Mount Battery. Other similar batteries have a low temperature limit of -4°F or -20°C, so we would expect the SmallRig VB99 Pro Mini V-Mount Battery to preform similarly.

Q: 9. To use the 8v power out on VB99pro to smallhd 5inch bright monitor which cable can I safely use ending in a LPE6 dummy battery?

A: To properly power the SmallHD 5" monitor, you will need a D-Tap to Dummy LP-E6 battery. The 8V out on the SmallRig VB99 Pro Mini V-Mount Battery is not suitable for powering the screen.

Q: 10. How many Mah battery capacity?

A: The battery capacity for the SmallRig VB155 mini (155/Wh) is equivalent to 10,472/Mah.