The QSC KW122 Padded Cover (Black) is a heavy-duty Cordura nylon cover, designed to fit over a QSC KW122 speaker.

Heavy-duty Cordura Nylon Cover

• Fits KW122 speaker
• Soft padded heavy-duty Cordura nylon cover

Related Questions and Answers

Q: 1. Will a Gitzo 2545 with the GHF2W head fit in this bag?

A: The Gitzo GC1101 Padded Tripod Bag has interior dimensions of 3.5 x L: 25.2 inches so it should fit your tripod.

Q: 2. As read that the Gitzo tripod bag can hold most all the sizes of the Gitzo tripods and possible a gimbal... Though I have the 'KING DADDY' largest tripod 5563GS and the Wimberley Gimbal. Will the Gitzo bag support both of these plus a few small accessories for the tripod and gimbal?

A: Unfortunately the Gitzo GT5563GS with the Wimberley WH-200 Gimbal mounted will not fit in the Gitzo GC5101 Padded Tripod Bag. The Tripod is 28.7" in length, and the Head is another 9.2". Put together this is 38" in length, which is more than the 35" capacity of this bag. The Manfrotto MBAG100PNHD Tripod Bag Padded 100CM (Black/Red Trim) linked here would be a better fit. https://bhpho.to/3xZy1EP

Q: 3. Will this bag fit the Mountaineer 1 with the 1382QD ball head? The specs suggest it might be tight.

A: Yes, it will fit.

Q: 4. Is this bag allowed as carry on in an airplane?

A: You would have to ask the airline. It would depend on the size of the overhead. I would think it would fit in most overheads, but not all of them. I carry a large Gitzo tripod and a monopod in the case, but have never taken them on a plane.

Q: 5. Will this bag fit a Manfrotto MT055XPRO3 tripod with 502AH head attached?

A: Yes, the Gitzo GC4101 Padded Tripod Bag will fit Manfrotto MT055XPRO3 tripod with Manfrotto 502AH head.

Q: 6. Will this bag fit combo of Gitzo GT3543LS connected to Gitzo GHFG1 Fluid Gimbal head?

A: While this case would be too tight for your Gitzo set-up, the Lightware C6140 Medium Stand Sack, BH # LIC6140 would offer some extra room. https://bhpho.to/2NOJx3N

Q: 7. Does a Gitzo Mountaineer Series 1, 4 sections with Arca-Swiss Cube head fit in this bag?

A: Interior dimensions of the Gitzo GC3101 Padded Tripod Bag are ø: 5.5 x L: 28.0" / ø: 14.0 x L: 71.0 cm. This would fit the Gitzo GT1542 Mountaineer Series 1 Carbon Fiber Tripod with the Arca-Swiss C1 Cube Geared Head.

Q: 8. hi to everybody.Does it support gt 5542ls with wimberely 200 gimbal head?

A: I have the Gitzo G1548 with Wimberley Gimbal head attached and it fits in the bag. It's snug but the bag construction is first rate and makes carrying the rig much easier.

Q: 9. I have a manfrotto MT055CXPro3 carbon fibre tripod with a collapsed length of 24.5 plus a Jobu Heavy Duty 3 Gimbal Head which adds another 9.5 for a total length of 34 . The internal measurements of the MBAG90PN conflict in the description. Could you please confirm if 34 in length will fit and what the diameter of the rounded end is; is enough width to accommodate the Jobu Heavy Duty 3 Gimbal Head which is 10 wide? Please advise asap, thank you!

A: No problem I have my hold tripod with head attached and plenty of room to spear plus some background legs in bag far as spec of 34 . You get that plus a bit more when you position on and angle before zipping. The zipper is rough needs broken in its good n well padded I recommend.

Q: 10. I have the 635 CF legs with a 504X head. Would this be the correct bag?

A: Based on my calculations, your tripod and head combination is about 35 inches. Therefore this slightly smaller bag would be more appropriate: https://bhpho.to/3mMU8Zb