The Video Mount Products LCD-MID-F Flat Panel Flush Mount - Black mounts most 27 to 42" flat-panel displays flush with a wall. The LCD-MID-F adds only an inch between the wall and the back of the flat panel.

The mounting rails of the LCD-MID-F adjust to host a variety of display sizes. The maximum supported flat-panel hole pattern is 410 x 340mm (maximum VESA pattern: 400 x 200mm). Load capacity for the LCD-MID-F is a heavy 100 lb.

Holds Most 27-42" Flat Panels    Adds Only 1" Between Wall & Display    Load Capacity of 100 lb

Accommodates double gang box

Attaches to two studs up to 16" apart or other suitable support surface

Black powder-coat finish

Related Questions and Answers

Q: 1. how would i mount this to a tripod?

A: it has a standard 1/4-20 screw mount

Q: 2. Does this camera have a stereo 1/8 inch mic jack and audio control in the menu for two separate audio channels?

A: Yes, the 1/8" audio jack is stereo. However, with this camcorder you will be able to use either the Internal Microphone or the external mic connection. You will not be able to use both at the same time.

Q: 3. Suitable for Aputure 300d II? What kind of run time at 100% output?

A: Yes, suitable. expect about 50 minutes run time at full power.

Q: 4. Does the Panasonic mdh 3 come with external microphone and adaptor for power to charge the battery on the camera? Is there any internal setting that enable the output like HDMI, AV to work?

A: Panasonic HC-MDH3 AVCHD Shoulder Mount Camcorder with LCD Touchscreen & LED Light has a jack for an external microphone. It comes with an AC cable and AC adapter to charge the battery in the camera. In the menu, set HDMI for the HDMI output and Video 2 for the AV out.

Q: 5. I own an iRigPre, and it’s jack-size is 3.5mm. Will I need to use the digital audio output? If so, can the iRigPre jack fit that output?

A: The iRigPre products are for use with SmartPhones. We are not aware of them being able to work with a camcorder like this.

Q: 6. Does this feature D-Tap charging?

A: Yes this Intellytech Socanland 280Wh can be charged via d tap chargers.

Q: 7. How does this camera perform in low light situations, such as a dimly lit wedding?

A: The 1/3.1" MOS Sensor on this camcorder is Back-Illuminated (BSI), which helps in lower light situations. it will not work as well though as camcorder with a larger 1" sensor like the UX90 from Panasonic, B&H # PAAGUX90. https://bhpho.to/2iGu2XB

Q: 8. Does this Camera Have a Clean output?

A: Yes it does, this camera does have a Clean HDMI output.

Q: 9. Can i use (B&H # PAAGVBR118) these batteries with this camera? B&H # PAAGVBR118

A: Yes, B&H# PAAGVBR118 will work on the HC-MDH3. They are compatible.

Q: 10. Can any of the HDMI wireless transmitters by Teradek be mounted to this camera?

A: The Teradek Bolt 500 LT HDMI Wireless TX/RX System, B&H # TE101905, will work great with this camcorder. The Bolt 500 includes a shoe mount so you can connect it to the camcorder. You will just need to supply the Transmitter with power, with the simplest solution for that being to add a battery plate for a smaller battery like the LP-E6. Bolt 500 HDMI - https://bhpho.to/2Byxzms LP-E6 Battery Plate - https://bhpho.to/2tn3TEf LP-E6 Battery Kit - https://bhpho.to/2BCwNVp