The Video Mount ER-8RS-A Adjustable 8 Receiver Rack Shelf accommodates up to 8 receivers, and can adjust left to right and front to back. Along with 10-32 and 12-24 rack screws, it includes front/top anti-roll bars and additional receiver separators. It can withstand a load of 50 lb (22.7kg), and sports a black powder coat finish.

Up to 8 Receiver Support    Load Capacity - 50 lb (22.7kg)    Black Powder Coat Finish

Accommodates up to 8 receivers

Can adjust left to right and front to back

Comes with 10-32 and 12-24 rack screws

Includes front/top anti-roll bars and additional receiver separators

Can withstand a load of 50 lb (22.7kg)

Sports a black powder coat finish

Related Questions and Answers

Q: 1. Is there any time delay of video signals if so how much please let me know.

A: According to Hollyland, there is a delay of 0.08s.

Q: 2. I know only three of these can be used in a location. But, since they are using different RF frequencies than other products, can more than three be used if some are 300 pro?

A: Hi Mark, due to FCC compliance, only 3 sets can be used in the same time for the Mars series.

Q: 3. What's the run time using the watson npf 770 battery?

A: Using the Watson NP-F770 Lithium-Ion Battery Pack (7.4V, 4400mAh), the transmitter will run for almost 3 hours and the receiver will run for about 4.5 hours.

Q: 4. Hello, I want to run two cameras (transmitters) into two receivers. I want to connect the two receivers to a YoloBox. How do I do this? Do I use the HDMI Out of the receivers into the HDMI 1 and HDMI 2 ports of the YoloBox? Thank You for your help!

A: Yes. Connect the output from the first receiver into input 1 and the output from the second receiver into input 2.

Q: 5. can I use a 400s pro transmitter to a 400s receiver for better latency ? I already have a 400 s

A: Hi John, sorry that Mars 400S Pro transmitter can not work with Mars 400S receiver.

Q: 6. how many kits can be used simultaneously?

A: Hi Carlos, Up to 3 sets can be used in the same location. Choose different frequency channels with the number difference between each two channels bigger than 2 Place each RX at least 0.5m away from the other Place all RX 1.7m above the ground

Q: 7. Will this also transmit the embedded SDI/HDMI audio coming from the camera? For instance, will I hear sync'd audio to video when I plug in headphones to the monitor or iphone?

A: Hi Darren, yes of course.

Q: 8. It looks like there are some rounded holes on the back for a fan that may be inside the units. If so, I'm curious if they generate noise that might interfere with audio on set. ?

A: There is some noise that, depending upon room conditions, may interfere with audio on set.

Q: 9. The manual shows sending from camera to a monitor. What about sending from camera to a switcher?

A: You can use the same instructions to send the video to a switcher.

Q: 10. Would this work with an ATEM Mini switcher and a Pocket Cinema camera and retain the ability to control the camera from the ATEM? In other words would whatever commands it sends between the devices be stripped out?

A: Control from the ATEM Mini cannot work with extenders or wireless.