The Remote Audio BNC to 1/8" (3.5mm) Timecode Cable is a 3' (0.91m) input cable designed for use with Apple iDevices such as the iPhone, iPod, and iPad. It consists of a BNC male connector on one end and a 1/8" (3.5mm), 4-conductor iDevice plug on the other.

For iDevices (iPhone, iPod, iPad, et al)    BNC Male to 3.5mm Mini Plug

Related Questions and Answers

Q: 1. Will this work in Europe? Or is it US/Canada only? Thanks

A: Yes this product works in Europe with Pal frame rates.

Q: 2. If I have a MixPre 6 II attached to the UltraSynch-1, can the UltraSynch-1 act as a master and provide timecode to the new Atomos X Control accessory attached to the Ninja V+?

A: If you are using the Atomos UltraSync ONE RF Timecode Sync for AtomX Sync and Ninja V (B&H# ATOMSYON01US) to provide timecode to the Sound Devices MixPre-6 II 6-Channel / 8-Track Multitrack 32-Bit Field Recorder (B&H# SOMIXPRE6II) then you can then use another Atomos UltraSync ONE RF Timecode Sync for AtomX Sync and Ninja V as a master to record timecode to the Atomos Ninja V+ 5.2" 8K HDMI H.265 Raw Recording Monitor (B&H# ATNINJAVPQ) whether or not you are using the Atomos AtomX SYNC (B&H# ATOMXSYNC1). Regarding the idea of passing timecode through the AtomX Sync in the manner you mentioned, Atomos has not added that feature as you describe it as of this writing.

Q: 3. Hi, can this device work with Alexa Mini camera and Zoom F6 recorder? Thanks.

A: Yes, as long as the unit you are using offers a sync input.

Q: 4. Is there a cable for RED Komodo timecode and genlock?

A: This cable from Atomos will provide timecode connection - https://bhpho.to/2IKoAFx

Q: 5. Will this work with the gh5 (not gh5s)

A: You can also adapt the TC output on the Ultrasync to stereo mini plug and stripe the Timecode as audio onto any camera that doesnt have a TC input. Your editing software must support TC on audio (for example Davinci Resolve does this)

Q: 6. Can I use just 1 of this on my main camera and just jump timecode on other cameras? will this work with Tascam X8 timecode?

A: Yes you can use the Atomos Ultrasync One with the Tascam X8 when using the Tascam AK-BT1 Bluetooth Adapter (BH #TAAKBT1) connected to the X8 recorder.

Q: 7. Looking to LTC sync multiple cameras with audio on location. Does this unit require RF sync during recording and if so does it emit RF interference with audio? Can you Jam sync and it will remain locked all day remotely?

A: I would also add that if you have a device like a Zoom F4 (6 or 8) which has it's own very precise internal time code, that you CAN use the UltraSync One device to Jam sync an external device that has a good internal timecode and a good one will keep a sync all day long. I use it to jam sync my Zoom F4 and it can last all day without being a frame off. Though if you have a moment during lunch, best to jam sync half way through the day. Also, from time to time, if the device you have that has it's own (very accurate) internal time code, it likely has a "calibration" option in its time code, which I would recommend running monthly. This just keeps it running tip top and can go all day without being a frame off :-)

Q: 8. A single Ultrasync comes with 2 bnc cables. The description for the bundle of 3 Ultrasyncs says it comes with 2 bnc cables. Shouldn't it come with 2 per unit or 6 in total?

A: Each unit in this bundle comes with 2 x Mini-DIN to BNC Cable equaling 6 in total.

Q: 9. How would one go about connecting this to the Sony FX3 for Genlock? This camera’s multiport supports timecode… just not sure if I can get Genlock from the UltraSync One into the FX3.

A: You would need to work with the Sony VMC-BNCM1 Timecode Adapter Cable, and a Atomos BNC timecode sync cable. Sony VMC-BNCM1 Timecode Adapter Cable BH #SOVMCBNCM1 Atomos DIN to BNC Timecode and Genlock Cable for UltraSync ONE (Blue) BH #ATOMXCAB01

Q: 10. If I want to sync my audio with 2 or 3 Ninja V, do I just need 1 of the Ultra-Sync 1 as the master connected to my MixPre 10, and the Atom X Sync on each Ninja becomes a slave and will communicate with the Ultra Sync via RF?

A: Yes, you only need 1 of the Atomos UltraSync ONE RF Timecode Sync for AtomX Sync and Ninja V to be the main unit while everything else can connect to it as clients via RF or Bluetooth.