Convert Line Signal Out To Microphone

Universal Audio 4-710d - Tone Blending Twin-finity Microphone Preamp And Di

Product Code: ga259083
Availability: In Stock

$5,997.00 $9,175.41

Qty

0 reviews Write a review

Description
Reviews (0)

The 4-710d from Universal Audio is a high-end, 4-channel microphone/line preamplifier with tube and solid-state tone blending capabilities. The dual signal path is perfect for a wide range of microphone and instrument sources, with each channel offering selectable 1176-style compression circuitry. Four additional line inputs feed 8-channels of pristine analog-to-digital conversion.

The 1176-style compression include specially tuned "fast" and "slow" settings, and can be completely switched out of the signal chain. Each of the microphone preamp channels allows for continuously variable phase-aligned tone, between a 100% tube and 100% solid-state signal path. Send and return jacks are available for external processing or signal access.

The 8 analog inputs are digitized via ultra high-quality 24-bit analog to digital converters at selectable sample rates up to 192kHz. Digital output is available via dual ADAT Lightpipe connectors (SMUX supported), or via a 25-pin D-sub connector for 8-channels of AES/EBU, allowing for easy integration with most popular audio interfaces.

4 Channel Dual-Path 1176-Style Compressor per Channel Send/Return Inserts Discrete JFET DI 8-Channel 24-bit AD Conversion Phantom Power Low-Cut Filter, Pad and Phase Inverse Internal Universal Power Supply

Parameters
Number of Channels	4 microphone inputs 8 inputs for AD conversion
Inputs	4 x XLR Microphone 4 x XLR Line 4 x 1/4" TRS phone (ch 5-8) 4 x 1/4" TRS phone Return 1 x 1/4" TS phone Instrument (front panel)
Output	4 x XLR 4 x 1/4" TRS phone Send
Other Connectors	1 x 25-pin D-sub AES/EBU output (8-channels) 2 x TOSLink ADAT optical output (SMUX supported) 2 x BNC Wordclock I/O
Phantom Power	+48V switchable
Multi Function	8-channel analog to digital converter
Gain Range	Gain Range for Unit: -Infinity to 70dBu Mic Range Gain: 10 to 60dBu Line Range Gain: -10 to 40dBu Hi-Z Range Gain: -10 to 40dBu
Maximum Input Level	Microphone, gain @ minimum solid state: +18dBu Microphone, gain @ minimum tube 1% THD: -7dBu, +8dBu w/pad Line, gain @ minimum solid state: +30dBu Line, gain @ minimum tube 1% THD: +8dBu Hi-Z, gain @ minimum solid state: +18dBu Hi-Z, gain @ minimum tube 1% THD: +8dBu
Maximum Output Level	+18dBu into 600Ω +28dBu into 100kΩ
Frequency Response	20Hz to 100kHz, +/-0.2dBu
THD + N	Tube: 0.1% @ +4dBU Solid-State: 0.005% @ +4dBU
Power Requirements	100~240VAC, 2.5A, 50/60Hz
Dimensions	2U 19" rack mount
Weight	Not specified by manufacturer
Specialties	-15dB pad 75Hz high-pass filter
Packaging Info
Package Weight	17.4 lb
Box Dimensions (LxWxH)	23 x 17 x 8"

Four TEC Award-winning 710 Twin-Finity microphone/line preamps
Dual-path 285-volt Class-A tube and transimpedance solid-state preamps
Phase-aligned tone-blending of tube and solid state circuits, creamy to crunchy
Newly designed 1176-style compression circuit per preamp channel
JFET Direct Input with 2.2MΩ ultra Hi-Z impedance with auto input override
Large backlit VU meters for flexible metering of input drive, gain level and gain reduction
Balanced send/return inserts (half-normalled)
48V phantom power individually switchable
75Hz low-cut filter
Polarity switch
Monolithic balanced output stage

Eight channels of high quality 24-bit analog to digital conversion
Selectable sample rates up to 192kHz
Digital output via dual ADAT optical and AES/EBU DB-25 connectors
8-channel soft limiter (switchable for all channels)
Ultra-low jitter clock subsystem
LED metering array with clip/hold indicators
75Ω BNC work clock I/O
Digital outputs anti-pop protection on power-up

Universal voltage internal power supply
Heavy-duty metal construction, two-space rack unit

Related Questions and Answers

Q: 1. Is this compatible with EN-EL15b and c batteries?

A: It is compatible with those batteries.

Q: 2. Is the display supposed to turn off after both batteries have been at 100% charge for a while?

A: There are separate charge indicators for each side of the charger. They will indicate when either or both sides have a fully charged battery.

Q: 3. can this camera accept an external audio input like from a mixer? Line level in?

A: The input is mic level only.

Q: 4. RE the question re can the Manfrotto charger be charged from an Anker bank, can it be charged using an USB-C to 12 volt cable?

A: Yes, the Manfrotto ProCUBE Professional Twin Charger for Nikon EN-EL14, EN-EL15, EN-EL25 Batteries can be charged on location with a power bank. There is a 12V cable included.

Q: 5. Does the have clean hdmi out?

A: It does indeed.

Q: 6. What are the dimensions?

A: The dimensions for Manfrotto ProCUBE Professional Twin Charger for Nikon EN-EL14, EN-EL15, EN-EL25 Batteries are 3 x 3 x 2''.

Q: 7. The camera does remote zoom from a cell phone or tablet. Does the cell phone or tablet do only zoom with that app?

A: the app gives you control over many features. Including zoom, start/stop record, adjusting exposure via shutter speed/aperture, auto focus via touch screen, and it also acts as a wireless monitor.

Q: 8. Is it compatible with Nikon Z8 batteries

A: Yes, the Manfrotto ProCUBE Professional Twin Charger for Nikon EN-EL14, EN-EL15, EN-EL25 Batteries is compatible with Nikon Z8 batteries (EN-EL15).

Q: 9. Will this work on a Panasonic GH5?

A: The flash will mount on the camera and fire. There is no interaction such as metering or TTL.

Q: 10. 30 FPS or 29.97?

A: 30 , 60 and 120

There are no reviews for this product.