You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Portabrace Rig-fs7xlor Large Rig Camera Case With Off-road Wheels And Interior Kit For Pxw-fs7

Portabrace Rig-fs7xlor Large Rig Camera Case With Off-road Wheels And Interior Kit For Pxw-fs7
  • Product Code: ga25927
  • Availability: In Stock

$1,197.30 $1,472.68

The black RIG-FS7XLOR Large Rig Camera Case with Off-Road Wheels and Interior Kit from Porta Brace is designed to carry your Sony PXW-FS7 camera. This large and flexible case is durable and complete with accessory items that will assure that your gear is held safely and comfortably in place. The case is made from rugged 1000-denier Cordura nylon for durability. The bottom is bolstered by a layer of waterproof rubber to assist with ground protection. It can be carried by its two top suede leather carry handles or removable suede shoulder strap, and is equipped with off-road wheels for added convenience.

The main compartment is accessed via strong zippers and a touch-fastened front flap. The compartment is empty and can be configured to meet your needs using Porta Brace's included hanging pocket, camera tie-down cinch, and camcorder cradle. The case also comes with two padded lens cups, a stuff sack, a carabiner with an attached flashlight, and a handy white balance card. Two large accessory side pockets are accompanied by a front slip pocket for various quick-need items. The RIG-FS7XLOR comes with a convenient rear trolley sleeve that allows you to load this case on top of your optional luggage cart.

Two Large Side Accessory Pockets    Front Slip Pocket    Touch-Fastened Front Flap / YKK Zippers    1000-denier Cordura Exterior    1" Padding Around Hollow Core Plastic    Waterproof Rubbered Bottom Layer    Rear Trolley Sleeve    Lens Cups, Pouch, Divider, Strap    Dual Soft Suede Carry Handles    Off-Road Wheels

Key Specs
ColorBlack
Carry/Transport OptionsHandle, Retractable Handle, Shoulder Strap, Wheels (Built-In)
Type of ClosureFlap with Zipper
DimensionsExterior
23.5 x 13 x 11.5" / 597 x 330 x 292 mm
Interior
22 x 11 x 9.5" / 559 x 279 x 241 mm
Weight6.5 lb / 2.9 kg
Parameters
Camera CompatibilitySony PXW-FS7
Carry/Transport OptionsHandle, Retractable Handle, Shoulder Strap, Wheels (Built-In)
Type of ClosureFlap with Zipper
Features
Bottle PocketNo
RFID-Blocking PocketsNo
Stand/Tripod HolderNo
Security LockNo
General
Padded InteriorYes, 1" / 2.5 cm Thick
DimensionsExterior
23.5 x 13 x 11.5" / 597 x 330 x 292 mm
Interior
22 x 11 x 9.5" / 559 x 279 x 241 mm
Weight6.5 lb / 2.9 kg
Packaging Info
Package Weight11.2 lb
Box Dimensions (LxWxH)27.5 x 16 x 13.5"

Zippered top access and touch-fastened front flap

Two large zippered side pockets; front slip pocket

Interior clear-zippered accessory pockets for small items

Dual-rigidity foam for protection

Includes internal lens cases and organizers

Related Questions and Answers

Q: 1. Hi There, My rig consist of a Sony Shoulder Mount, Fujinon MK 50-135mm lens and the Sony XDCA-FS7 Extension Unit. You think the bag is long enough to handle my rig?Thanks

A: Yep, i have the same setup with the 18-55mm Fujinon and a Mattebox/rails combo and it just fits.

Q: 2. Will a Canon C200 (with grip) fit inside?

A: The C200 with grip attached is approximately 7.0 x 6.0 x 8.0 in. (178 x 153 x 204mm) The interior of the bag is 16 x 15.5 x 9 / 40.64 x 39.37 x 22.86mm. You will have plenty of room for the camera and all the other bits you will want to carry with it.

Q: 3. Will bag fit as airline carry on luggage?

A: The one standard dimension of carry on baggage for airlines is the linear dimension of the bag. That being the total of all three measurements, height x width x depth equalling no more than 45 .There is no all-airline rule for the width x height x depth of a carry-on bag. However, 22 x 14 x 9 inches is a very common one used by several of the major airline.Unfortunately, the Porta Brace RIG-C3500OR bag, being 19 x 12 x 17 , cannot be considered a carry-on since it's combined dimensions total 48.0 .Here is a ThinkTank that fits. Think Tank Photo Airport International V3.0 Carry On (Black) B&H # THAPINTV3. 14 x 21 x 8 linear total 43 . This SKB hard case fits but no wheels. SKB iSeries Case for Canon C300/C500 Airline Carry-On B&H # SK3I20118C30. Finally, here ia a hard case with wheels that fits Porta Brace PB-2550DSLR Medium, Wheeled DSLR Case (Blue) B&H # POPB2550DSLR.

Q: 4. Is this case tall enough to store the FS7 with a Zacuto or Sony baseplate attached to it?

A: Yes it is. I have the full shape rig on mine and it fits easily.It is a big bag with lots of room.

Q: 5. Porta Brace has put out a few different types of bags for the FS7. Im not sure what the difference is between the Porta Brace RIG-FS7 Top Opening Rigid Case for Sony FS7 and the Porta Brace RIG-FS7XT Carrying Case with Kit for Sony FS7.Do both of these bags have wheels on the bottom?Are they both small enough to be carry-ons on a plane?

A: The RIG-FS7XT is a wider bag that allows the FS7 to be carried with grip and viewfinder attached albeit compressed. This allows you to pull the camera out of the bag and be shooting in moments. However, this comes at the cost of carry-on size. Since the bag's exterior dimensions's of 21.3 x 15.0 x 16.0 (54.0 x 38.1 x 40.6) cm are greater than the carry-on size of 9 inches x 14 inches x 22 inches (22 cm x 35 cm x 56 cm), or the combined length, width and height, (including any handles and wheels) exceeds 45 linear inches (or 114 cm), it cannot be taken by you onto the aircraft.The RIG-FS7, on the other hand, is 21.5 x 10.0 x 12.0 (54.6 x 25.4 x 30.5 cm) and easily fits carry-on requirements. However, this means the case is much narrower and you must remove the right hand grip and the viewfinder before putting the camera in it.

Q: 6. Can you add wheels to these cases? I see an area on the bottom corner where there is velcro. Wondering if an axleand wheels can be threaded through that space and if the velcro is strong enough to hold?

A: You can actually select to have the weels included. They slip into the side with the taller front pocket (right side on the item default picture). There is also a handle that comes included for the case and you carry it similar to a rolling tripod case. For clarification, the FS7 sits on the high side when carrying on wheels, closer to the handle side you hold while wheeling it.The wheels BTW do not have a solid axle. They are on studs. I was a little worried but I ahve my bag LOADED and it has held up pretty well.

Q: 7. Can I take this on a plane as a carry on?

A: I would have to lean on no as the answer. Currently, Delta, United, American use 22 x 14 x 9 inches as the acceptable carry on size. Additionally, baggage may not exceed 45 linear inches in combined length, width and height, including any handles and wheels. This case's exterior: 23.5 x 11.5 x 13.0 or 47.8 .

Q: 8. Will it hold a FX9 rig as well?

A: Yes, the PortaBrace RIG-FS7XL Large Rig Camera Case with Interior Kit for PXW-FS7 will hold a Sony FX9 as well.

Q: 9. Interior dimensions?

A: Dimensions Interior: 19 x 12 x 8" / 48.26 x 30.48 x 20.32 cm Exterior: 23 x 18.75 x 16" / 58.42 x 47.63 x 40.64 cm Weight: 11.5 lb / 5.2 kg

Q: 10. What are interior dimensions ? ??

A: The interior dimensions are: 20.0 x 13.5 x 13.5 (50.8 x 34.3 x 34.3 cm)

16/07/2024

We use this to house our drone package.

5
14/07/2024

I like athornton purchased to use with a Phantom 2 Vision and have to agree with all comments made in that review. Guess I have Mike to thank for his return, as it helped with my purchase price. :-) Only negative item is that one wheel does not want to turn easily. But, for me that is not an issue as did not purchase for the use of the wheels.

5
14/07/2024

Great case, waterproof and has sculpture foam in it to customize. Really handy that it rolls. Sturdy enough to survive an airplane trip

5
21/06/2024

Works well with phantom

5
27/04/2024

I use this case to transport my Phantom 2 Vision and accessories. This includes 3 batteries, the controller, extra propellers, memory cards, and some tools. The case makes its really easy to take the Phantom from job to job. I am not worried about my equipment moving around in the case or that it will get damaged in transport. The case is customizable. It is precut into little squares. All one has to do is punch out the squares or push them down to the shape and size of the equipment that will be stored in the case. BH does sell some cases that are delivered preformed to the Phantom. If that is what you are looking for then this is not the case for you. I do wish the slot on the outside for a business card was actually large enough for a business card.

5
13/04/2024

Very nice case. And of course, great pricing from B&H. Bought this for my new Panasonic 17 inch monitor. Very well made case. I like the latches. Easier to open than the standard Pelican cases. Nice sturdy looking wheels. Haven't had the case that long but, I really like it. I have bought Pelican cases for years, and they are always great, and worth the money, however, I saw this case on sale at B&H, and saw that it was a case designed for monitors like mine. As I said, I really like the case so far. It may be a soon to be discontinued item but, if you find it for sale still, and are considering buying one, don't hesitate buying one.

5
04/04/2024

Excellent case - very sturdy. Tons of room. Fits Sony camera, wireless audio kit, LED light, boom mic, manuals with lots of room to boot. Secure locking. Interior soft case removes easily. Fairly heavy - you'll appreciate the wheels.

5
30/11/-0001

This thing is great. Have a camera, mics and mac pro in it. Works great!

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Arri Camrade Raincover Ob/efp Large

$1,650.00 $1,996.50

Skb Iseries Waterproof Lure Case (large)

$629.97 $881.96

Products You May Like

Adonit Mark Stylus (silver)

$29.97 $44.95

Heliopan 46-62mm Step-up Ring (#177)

$113.85 $157.11

Hp Renew Executive 16" Laptop Bag (black)

$189.42 $232.99

Oben Lh-2510 Leveling Base Head

$299.85 $428.79

Tiffen 4 X 4" Gold Diffusion/fx 1/2 Filter

$1,050.00 $1,344.00