The Acebil H50 Head is a Professional series tripod head that supports a payload of 22 lb (10kg), and provides fixed counter balance and 2-step pan and tilt drag. You can achieve a tilt angle of +90° / -80° with the H50 head. Also integrated into the H50 head is a 15 sec auto LED level illumination feature. A slide camera plate can be attached using the included 1/4" screw and video pin. You are also provided with 2 spare 3/8" screws, and a slide range of ±35mm is offered by the H50 head. You can use the H50 head with the Acebil T750 and T752 Professional series tripods.

Payload - 22 lb (10kg)    Fixed Counter Balance    2-step Pan/Tilt Drag    Tilt Angle - +90° / -80°    15 sec Auto LED Level Illumination    Slide Camera Plate    Plate Attachment - 1/4" Screw/Video Pin    Two 3/8" Spare Screws    Slide Range - ±35mm    T750/T752 Professional Tripod Support

Professional series tripod head

Supports a payload of 22 lb (10kg)

Provides fixed counter balance and 2-step pan and tilt drag

Offers tilt angle of +90° / -80°

Includes 15 sec Auto LED Level Illumination

Provides slide camera plate attachment using the included 1/4" screw and video pin

Includes 2 spare 3/8" screws

Offers a slide range of ±35mm

Supports Acebil T750 and T752 Professional series tripods

Related Questions and Answers

Q: 1. The tilt on mine is a bit stiff and sometimes grabs right at the beginning of a tilt. Can I adjust the tilt to be a little less tight?

A: There's a knob on the left side of the head (when you are behind the tripod) that can be loosened. Left loosy righty Tighty applies to this tripod. The knob can be pulled out and respun to loosen or tighten more. Good luck

Q: 2. I recently got this tripod and the handle on the right side - where it's attached - blocks the motion for 2 other functions. I cannot turn the plate lock dial, or the tilt lock dial because the handle attachment is in the way. I feel like I am missing something because it's so strange. Does anyone know what the deal is with this?

A: Pull the knob out and twist it so you will be able to adjust it

Q: 3. Can the clamp be turned 90º so arca plates are oriented left-to-right instead of front-to-back?

A: Yes. You may use a hex key to reposition the quick release clamp on the Oben VH-A30 Tilt Head so it may be rotated 90 degrees so the head may be used to tilt the camera left-to-right instead of front-to-back.

Q: 4. What accessories do I need to make it accept Arca-Swiss plates? I use this mount in other tripods.

A: This tripod is not Arca Swiss compatible.

Q: 5. Is this a good tripod for a mirrorless camera and teleprompter setup?

A: With an 18 pound load capacity this is a great option for a mirrorless camera and a lighter weight teleprompter.

Q: 6. What is the difference between this head vs 0705 FSB-8T?

A: The T stands for Touch & Go plate. The FSB 8 comes with sideload attachment of camera plate

Q: 7. does it have pan and tilt locks?

A: Yes, this tripod has separate pan and tilt locks

Q: 8. Can you remove the fluid head from this tripod and place it on another set of legs? I would like to get a different set of legs for travel use that are lighter and then use this in the studio and hopefully share the fluid head back and fourth.

A: The head is removable. Loosen the allen keys beneath the center post cap then twist to remove.

Q: 9. what is max height?

A: 79.5 inches to the plate when fully extended without the dolly add about 2 inches when on the dolly.

Q: 10. can this extend?

A: Both the legs and the center column can extend.