The Female Spigot (3/8"-16 to 1/4"-20) from SHAPE is a generic metal spigot which accepts a male 3/8"-16 screw on one end and a male 1/4"-20 screw on the other. This adapter spigot permits the user to attach most accessories with a male mounting screw to a compatible support device with its own male mounting screw.

For Support or Lighting Systems    Compatible with Most Common Thread Sizes    Metal Construction

Related Questions and Answers

Q: 1. Is this rig compatible with the Sony FX3?

A: The SHAPE Cinema Cage Kit with Shoulder Mount System for Sony a7 II, a7S II, & a7R II is not compatible with the Sony FX3.

Q: 2. How long can it power a device consuming 4w power?

A: The SHAPE NP-F980 Dual Charger with Two 6600mAh Lithium-Ion Batteries powering a 4w device will last about 12 hours.

Q: 3. Is this compatible with the GH4?

A: This rig has been designed to perfectly fit Sony A7II series. The cage will not fit a Panasonic GH4. However, SHAPE has several rig solutions for your camera that can be found under the link below:a href= http://www.bhphotovideo.com/c/search?Ntt=shape+gh4&N=0&InitialSearch=yes&sts=ma&Top+Nav-Search= target= _blank http://www.bhphotovideo.com/c/search?Ntt=shape+gh4&N=0&InitialSearch=yes&sts=ma&Top+Nav-Search=/aHere is what we suggest if you are searching for a similar bundle as the A7II. You can use a GH4 should mount with a Matte Box and a Follow Focus within a similar price range. This shoulder mount has been designed to be used with the YAGH interface unit (#PADMWYAGH). If you use your GH4 without it, you will also need a Delta Quick release to lift it up. In this solution, the front rods will have to be mounted lower than back rods.If you need more information or pictures of the final result, please don't hesitate to contact SHAPE TEAM at info@a href= http://shapewlb.com target= _blank shapewlb.com./a

Q: 4. What type of ND filters can fit on the Matt box? Can I find compatible glass filters?

A: Hi,Our Matt box are compatible with 4x4 filters , I am sure you can find those type of filters at your B&H store !Best regards

Q: 5. Is there difficulty seeing the camera's LCD screen when the rig is resting on your shoulder?

A: Hi Parker, thank you for your question. This solution is perfect to use with an external monitor. If you want to be aligned with the camera screen, you can add a off-set bracket with two sets of 15mm rods. We suggest a 10 and a 12 set to replace the actual 18 rods for a better confort. Best regards.

Q: 6. An article on 4kShooter said that this battery has a 12 volt output port (like the Powerextra batteries had before they changed the design). DOES THIS HAVE A 12v OUTPUT? Barrel connector? D-Tap?

A: Hello Steve, Thank you for your question! Unfortunately, it doesn't have a 12V output, no D-Tap or barrel connector either. Only a 5 Volt Micro-USB connector on the side. We hope this helps and we thank you for your interest in our products. The SHAPE team

Q: 7. Will this cage fit the updated 12g Video Assist monitor? I see that the new model is a basically 1/4” thicker.

A: Hello Robert, Thank you for your question! We cannot guarantee our cage for the 4K monitor will fit the new 12G one, as our cage was specifically designed for the 4K, especially if you tell us the new one is a bit thicker physically. We hope this helps and we thank you for your interest in our products. The SHAPE team.

Q: 8. Is there room to mount these on an fs7 and run d tap out of the small space still?

A: You should have some space to run the Dtap out of the battery while it's mounted on a FS7.

Q: 9. The Shape Cinema Cage work well with Sony a6300?

A: Hello Thiago, Thank you for your question! Unfortunately, our Cage system was designed specifically for the Sony A7Sii. Trying to fit another model would be a bit risky. But stay tuned for more cages and systems from SHAPE in 2017. We will surely come out with systems compatible for this camera.We hope this answers your question and we thank you for your interest in our products.The SHAPE team

Q: 10. Why would I use the low-power charging mode? Is there any downside to the high power mode? I have this charger but don't know.

A: The SHAPE NP-F980 Dual Charger with Two 6600mAh Lithium-Ion Batteries (B&H# SHNPF2B) offers what the the manufacturer calls a high-current mode and also a low-current mode. While the voltage is the same, the former (high-current) would typically be used for larger batteries or for a faster charge. The latter (low-current) mode would be used for the smallest batteries (e.g., 2500mAh and below) or to minimize the heat that is generated when a battery is charged. While it is best to allow a battery to cool before recharging it at all, if you needed to begin charging a warm battery immediately after use then it would be best to use the low-current mode at least until it cools down. Extreme heat (and cold) can damage batteries.