You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Bogen Hs7ez Easy Design 7.5w Paging Horn (mocha)

Bogen Hs7ez Easy Design 7.5w Paging Horn (mocha)
  • Product Code: ga259690
  • Availability: In Stock

$254.85 $374.63

The mocha Bogen Communications HS7EZ is an Easy Design series 7.5W single-tap paging horn offering intelligible voice reproduction and versatile positioning for paging, talkback, and security applications in work sites, schools, parking lots, warehouses, and more. When connected to a 70V amplifier (available separately), it delivers a 7.5W output, a sound pressure level of 105 dB, and a frequency response of 250 Hz to 14 kHz. Volume is adjustable via a stepped attenuator control.

Its weatherproof, all-metal housing ensures reliable durability indoors and outdoors, and can be precisely tilted and swiveled using the sturdy mounting bracket. Banding slots allow mounting to a beam or pillar, and I-beam flange mounting is supported via the Bogen BC1 clamp (available separately). A 12" lead wire permits simple electrical connections to your 70V amp.

7.5W RMS Power Rating    250 Hz to 14 kHz Frequency Response    Stepped Adjustable Volume Control    Single-Tap Design    Weatherproof Metal Housing    Integrates with 70V Amplifiers    Tilt-and-Swivel Mounting Bracket    12" Lead Wire    Banding Slots for Beam/Pillar Mounting

Parameters
Power Rating7.5 W RMS continuous
Sound Pressure Level105 dB SPL at 4' on axis with rated power output at 1 kHz
Frequency Response250 Hz to 14 kHz
Dispersion120°
Input Impedance653 Ohms
Input12" / 30.5 cm lead wire
Construction MaterialWeatherproof metal
Dimensions6 x 4" / 15.2 x 10.2 cm
Weight2 lb / 0.9 kg
Packaging Info
Package Weight1.76 lb
Box Dimensions (LxWxH)8.1 x 7.4 x 4.7"

Stepped attenuator volume control

12" lead wire for simple electrical connections

Weatherproof metal housing covered in a durable textured enamel finish

Tilt-and-swivel mounting bracket provides flexible positioning

Banding slots allow easy attachment to a beam or pillar

Mount to I-beam flange using Bogen BC1 beam clamp (available separately)

Bogen TCSPT1 terminal cover (available separately) enables connection of conduit fittings

Related Questions and Answers

Q: 1. I have the Panasonic Lumix G X Vario PZ 14-42mm and the speed knob doesn't work. There's only one speed. Any fixes for this?

A: No, I'm sorry, the Panasonic Lumix G X Vario PZ 14-42mm f/3.5-5.6 ASPH. POWER O.I.S. Lens (B&H# PA144235XS) is a basic consumer PZ zoom and doesn't offer variable zoom speed as an option.

Q: 2. Will the Fujinon MCA-7 Mounting Clamp work with this?

A: No. The following system offers its own mounting system.

Q: 3. Can I control this lens: Fujinon LA16x8BRM with Blackmagic zoom & focus on demand?

A: The Blackmagic Design Focus and Zoom demand will only work with the BM Studio 4k Pro and Plus cameras. The Fujinon LA16x8BRM lens is compatible with the URSA Broadcast and would use the following controls. https://bhpho.to/3BtPYP7 Link to URSA Broadcast kit -https://bhpho.to/353s4hc

Q: 4. Puedo hacer copias de una pc?

A: Codificia en tiempo real a las tarjetas SD. It encodes in real time onto SD cards.

Q: 5. Will this work with the Ursa Mini pro g2 4.6k and 12k?

A: Unfortunately the Focus Demand will not work with the Ursa Mini Pro G2 4.6K and 12K.

Q: 6. How do you create preset zoom/focus points? I have this controller connected to my BG2 camera and can assign zoom/focus presets to the various function buttons, however I can't fine a way to actually create the preset points.

A: The Blackmagic Design Zoom Demand (B&H# BLZD) has two buttons which may be programmed to particular zoom points. A power zoom B4 or PL lens is needed. A firmware update of your camera may also be necessary. To set a preset, hold one of the side buttons down on the Zoom Demand. You can see a demonstration of that beginning at 17:55 here: https://bit.ly/3CwDsQw

Q: 7. Are plans for the zoom demand to work with other lenses? I have 3 BMD Zoom Demands on the way and can not find lenses to use them with.

A: The BM Zoom Demand will work with the following lenses on the Studio 4k Pro and Plus. Tested lenses. https://www.blackmagicdesign.com/support/faq/59009

Q: 8. Would this be compatible with the Canon C-300 and Canon 70-200 lens?

A: No the Blackmagic Design Zoom Demand is only compatible with Blackmagic cameras.

Q: 9. So if the connectivity to the Camera/Lens is through the USB cable, how do you do that with both the Focus and Zoom control if there is only one USB input on the camera?

A: The following unit has a loop a/b ports system to accommodate your focus and zoom needs.

Q: 10. Does this come with the clamp to put on a tripod arm?

A: Yes.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Products You May Like

Sgc Lights Prism Se 120 Led Tube Light

$1,044.00 $1,430.28

Portabrace Backpack For Canon Xf705

$882.96 $1,403.91

Tiffen 4 X 5.65" Cc05r Red Filter

$1,088.85 $1,578.83

Rogeti Smartphone Holder Set

$264.00 $337.92

Rotatrim Technical T950 Rotary Cutter (38")

$3,749.97 $4,574.96

Idea Vision Spidermount 220 System Kit

$15,472.65 $24,137.33

Skb A-style Mandolin Case

$509.97 $637.46