The CINEGEARS 4 x 38mm Diameter Replacement Gear Set for CINEGEARS Lens Motors features 4 lightweight plastic gears that allow you to drive most geared cine or ENG-style lenses. The gears can replace the original aluminum drive gears for CINEGEARS lens motors, providing a cost effective solution to handle surprises in the field.

Each gear is only 38mm in diameter, and features a captive mounting screw. The smaller diameter of the replacement gear, as compared to the standard drive gears, may provide smoother movement as you drive the lens with your motor. Each gear is labeled allowing you to easily select the right gear for your lens. The gear marked 0.8 is for cine-style lenses. Gears marked 0.5 and 0.6 are standard for ENG-style lenses.

Provides Cine & ENG Drive Gears    Captive Mounting Screw Installed    Smoother Movement with Small Lenses

Related Questions and Answers

Q: 1. What is the diameter and overall height of the disc-shaped clamp body?

A: The overall height is approx 3.15 inches x 2.25 diameter

Q: 2. Would this plate work for fiilex led lights? Specifically the p-360ex?

A: If you purchase the FiilexCoiled D-Tap Cable (1.9'),B&H#FIFLXA011, then yes, the CINEGEARSV-Lock Battery Plate with Universal Clamp for LED Light will work to use V-mount batteries on the Fiilex P360EX light fixture.

Q: 3. What is the advantage of these antennas over the stock, regular antennas?

A: The Cloverleaf antennas are more stable in all directions and provide an increased range over the standard antennas. They are also weather sealed and water proof.

Q: 4. Will this work with the URSA Mini?

A: The Ursa Mini cameras have a standard 2.5mm LANC input. We believe that this Trigger Cable should work with the Ursa Mini.

Q: 5. Is it long enough for Nikon 58mm 0.95 Noct?

A: The CINEGEARS Customizable Geared Focus Ring (B&H# CI1401), in its official sizing, is 0.02 of an inch too small for the Nikon NIKKOR Z 58mm f/0.95 S Noct Lens (B&H# NIZ5895). However, given how close that is, you may be able to get it to fit, especially if the ring is placed in very hot (but not boiling) water for a few seconds prior to useage. However, as an alternative, the Tilta DSLR Lens Follow Focus Adapter (B&H# TIFRT03) will fit the Noct: https://bhpho.to/3W0Ka8l

Q: 6. Does this have a 1/4" female adapter for the tripod (bottom) side.

A: The bottom thread would be 3/8-16".

Q: 7. Work with Proaim Polaris Portable Dolly ?

A: No, the CINEGEARS Pegasus Curved Track (67") (B&H# CI3172) is not compatible with the Proaim Polaris Portable Camera Dolly with Universal Track Ends (B&H# PRDLPLRS01) without modification.

Q: 8. Can these be used with Hollyland 400s system? If so, is there any advantage to buying them over the ‘mushroom’ antennas offered by Hollyland?

A: These are for CINEGEARS systems. We are not aware of these working with Hollyland systems.

Q: 9. I use a setup of one hard wired remote along with a splitter cable and extension cable to trigger two cameras at the same time for interviews so they do not require syncing in post and for the volume of interviews that I do this setup is very important to me. I used two 5DmarkIII's before and now use one 5DmarkIII with my new C300markII. Will this or any other known remote trigger both of these cameras with one remote using a splitter cable? I tried with two intervalometers I currently have and they do not trigger the C300markII even with remote setting correctly set to standard mode unless there's something else I'm missing. Thanks for your help!!!

A: I'm sorry to say we are not aware of a solution like this that will work for both the C300 Mark II and the 5D Mark III. The C300 Mark II and 5D Mark III have different connections for remote controls, which makes this not possible.

Q: 10. What is the current that is output through the four D-tap connectors?

A: The power output of the CINEGEARS Compact D-Tap Power Distributor is based on what power you input. For example If it is plugged into a D-Tap battery, and the battery D-Tap output is 14.8V, it would support up to 14A Draw, the power distributor will out put 14.8V, and14A Draw.