The HRS-1S from Wohler is a half-rack 1U audio monitor with two XLR inputs and outputs. You can monitor the incoming analog signal through its two built-in amplifiers and speakers, or through the headphone jack. It's incredibly small size makes it an excellent choice to critically monitor audio at full-fidelity in situations where physical space is at a premium.

The HRS-1S features two speakers and two custom amplifiers that accomplish accurate monitoring in a small footprint. A mid-range speaker reproduces upper and mid frequencies, and a dedicated woofer speaker handles frequencies below 500 Hz. The audio from the input source is outputted on a pair of balanced XLR jacks, so you can share the signal with other equipment.

A headphone jack on the front of the HRS-1S mutes the speakers when in use. The audio is summed to mono through the speakers, but on the headphones you have the option of listening in stereo or mono with a handy toggle switch. The HRS-1S is a great ultra-compact and portable solution when you need to reliably monitor audio signals in mobile production vehicles, TV studios, teleconferencing installations, VTR bays, satellite link facilities, and any situation that requires professional monitoring.

Smallest Possible Full Fidelity Audio    Two Speakers Driven by Two Amplifiers    Stereo Signals are Summed to Mono    Stereo/Mono Toggle Switch for Headphones    Output Limiter Protects Speakers    Made in the USA

Incredibly compact, fits almost anywhere, 1/2 rack wide, 1U high

Premium quality subwoofer & mid-range speaker

High-quality AMP series internal amplifier

2 balanced analog inputs with loop-through (1 stereo)

95 dB SPL at 2 feet (0.6 m)

Premium quality drivers & power amplifiers

Extended frequency response and low distortion

Focused sound reduces adjacent bay crosstalk

Electronic cancellation of bass frequencies provides audible indication of phase/polarity problems

Thorough magnetic shielding for placement next to sensitive equipment

Headphone jack mutes speakers

Quick and simple installation

Related Questions and Answers

Q: 1. Will this work with a sony ax100?

A: This monitor will work with the AX100. You will need this cable: Atomos Right-Angle Micro to Full HDMI Coiled Cable (11.8 to 17.7") B&H # ATATOMCAB007 .

Q: 2. Would this work with a dummy battery that you could use dtap to run power?

A: Ive never tried; im afraid I cant help you

Q: 3. What's the best protective sleeve to use for this monitor? Neoprene or hard shell preferred. I know the dimensions are 4.9 x 8.4 x 1.1" but I don't know what actually fits this the best.

A: Please review the two following items ProAm USA Soft Padded Carrying Case for 5 to 7" LCD Monitor Kit (Deep) BH #PRP7CLG • MFR #P7C_LG https://bhpho.to/2ynVPpJ Jason Cases Pelican Case for SmallHD 703 UltraBright Monitor BH #JASM703UBBK • MFR #SM703UBBK https://bhpho.to/3Hsk34D

Q: 4. How long does a fully charged battery power this monitor for?

A: It depends on the battery's capacity. The Elvid Fieldvision Monitor has an 8W power consumption.

Q: 5. What would the run time be using the suggested battery (Watson NP-F770 Lithium-Ion Battery Pack (7.4V, 4400mAh))? What would be necessary to run this monitor on battery for approx 7-8hrs while recording football games?

A: This kit includes a single NP-F770 battery. You should get around 4 hours of run time with that battery on this monitor. It would be a good idea to purchase a 2nd battery to go along with this kit, B&H # WANPF770.https://bhpho.to/2bRUc5Z

Q: 6. Is there any latency when monitoring audio from the camera?

A: The audio is received via HDMI, so there should not be any noticeable latency.

Q: 7. Does the SDI accept 4k image and is there cross conversion between HDMI and SDI and vice versa

A: This monitor does not offer Cross Conversion between the SDI and HDMI connections.

Q: 8. is it support hdmi 2.0?

A: The monitor only supports HDMI 1.4b.

Q: 9. How do I flip the image (horizontal and/or vertical)?

A: In the menu, select Image Flip to flip the display horizontally, vertically, or both.

Q: 10. Hi. Can it be mounted on Canon C70, may be on Hot Shoe.?

A: Yes, this can be attached to the C70’s shoe mount.